20 Most Recent Kodak EasyShare C330 Digital Camera - Page 4 Questions & Answers

If none of the suggested causes helps resolve the issue, then I suggest you bring it in for repair. Please check the following things when the camera does not turn on. Possible causes and how to handle them 1. The camera is not on Turn on the camera. (Operation procedure varies between camera models. Please refer to the camera user guide supplied with your camera.) 2. The rechargeable battery is not fully charged. Make sure the rechargeable battery is fully charged. If the battery has not been used for an extended period of time, or if it is being used for the first time, it may not be fully charged. In cases like this, fully charge the battery and then discharge it completely in the camera several times to bring the battery back to its normal performance. The rechargeable battery's capacity diminishes the longer the battery is used. When the battery consumption becomes quicker, the battery life may be at its end. Replace the battery with a new one. 3. The battery terminals are dirty. When camera does not operate with a brand-new alkaline battery (for cameras that use AA-size batteries) or with a fully charged rechargeable battery, the terminals may be dirty. Polish the terminals with a dry cloth and make sure the terminals are clean. If the terminals are covered with oil from your skin or similar matter, this may cause poor contact and power may not be fully supplied to the camera. Also, polish the battery charger terminals with a dry cloth before charging the battery. If the terminals are covered with oil from your skin or similar matter, this may cause poor contact and the battery may not be fully charged. 4. The batteries are not installed correctly (for cameras that use AA-size batteries) For cameras that use AA-size batteries, multiple batteries are used in one camera. Make sure the direction of each battery matches the direction indicated on the camera. If any of the batteries are improperly inserted, the camera will not operate. 5. The battery cover or CF card (SD card) slot cover is not securely closed Most cameras have a lock mechanism on the battery cover. The camera will not turn on if the battery cover is not locked or securely closed, or if the CF card (SD card) slot cover is not securely closed. Make sure these covers are securely closed. If your camera does not operate after checking each of these things, or if there is any visible damage on your camera that could be the cause, please contact the nearest Service Center.

If you haven't done anything with the card since, you may be able to recover at least some of what was on it. Do a Google search for "data recovery software" and select an appropriate program for your computer and operating system. Put the memory card into a card reader and run the program.

Hi there. Here is how you do it. Go into the menu and navigate to the Copy screen. Choose an option. One is to copy pictures from the camera's internal memory to the SD card, and the other is copy from the SD card to the camera's internal memory. Then press OK. On the next screen, you have two option choices, either copy all images, or selected images. Hope that helps.

You can download EasyShare software here: Kodak_Store/SoftwareHope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice weekend.

Not necessarily junk. Are you trying to use a 4GB or higher card with your older camera? If so, that's your problem. Your camera can only use 2GB or less standard SD cards (and not SDHC cards). Fortunately, 2GB SD cards are very inexpensive, and widely available on Amazon if your local store no longer carries them.

The C330 works with MMC and SD cards. MMC cards are all but extinct now, but you should be able to find SD cards up to 2GB in size at just about any department, electronics, or office-supply store.Be careful to get an SD card, not an SDHC or SDXC card. SD cards only go up to 2GB in size.

Hi, Go into the menu and check for daylight settings. It is probably set on manual. You may want to change that to day light only.But if you are in a dark or shaded room you will need more light. My advice is put it on auto for best results. Good luck.

Hi, Have a camera shop check it out. It could be it was dropped and damaged the shutter. good luck.

The Z650 is designed to work with SD cards. Your 8GB card is actually an SDHC (Secure Digital High Capacity) card. While an SDHC card will fit into an SD slot, it will not work properly. You'll have to stay with SD cards 2GB and smaller.

This error message means that the card is corrupted or formatted for another digital camera. Turn off the camera. Insert a new card or format the card.
Try to format the memmory card using a card reader and the PC this should solve your problem if not you have to replace the memmory card.

I don't know exactly what the problem is, but it could be related to the card. Does it have a little switch to lock the card? The camera might be telling you it can't write to the card because it's locked.
If that doesn't fix it, here's a link to the camera's manual. Formatting the card should clear all the photos.
http://resources.kodak.com/support/pdf/en/manuals/urg00409/C330_GLB_en.pdf
I hope this helps! Please rate this solution if it does!!

The C330 uses MMC and SD cards. Your 4GB card is actually an SDHC card. While SDHC cards will fit into SD slots, they are electronically incompatible and won't work. You need to go with cards 2GB and smaller.

so what is the problem? Use colored tape?

You will have to delete some photos.
If your current storage is set to memory card, you have to set it to internal memory before deleting photos.
Use the delete function in the camera menu.

When you put USB connection to your PC, use Explorer, or some other file manager (Total Commander, Free Commander ...) for going to your memory card (like you are going to some memory stick). Move your picture file to another folder on computer for saving. You can copy, move, delete files from your camera. It is the same as from memory stick.
On menu of camera, you must have option for deleting (or formating) camera memory. I don't like this hand removing. You have better control with computer...

Insert the memory card. Press the MENU button. Use up/down to highlight Setup (three horizontal sliders) and press the OK button. Use up/down to highlight "Format" and press OK.

Make sure you're using an SD card. If the card is larger than 2GB than it's actually an SDHC card and won't work in the C330.

The CX6200 works with MMC and SD cards. Your 4GB card is actually an SDHC card. While SDHC cards fit into the slot, they are electronically incompatible and will not work. The camera is limited to cards 2GB and smaller.

Sorry if that wasn't the answer you wanted to see, but that's the way this camera works.

when you play video, use the UP and DOWN buttons to adjust volume.

In any mode, press the MENU button. Use cursor-up/down to highlight Setup (three horizontal sliders). Use cursor-up/down to select "Date Stamp."

http://resources.kodak.com/support/shtml/en/manuals/urg00409/urg00409c4s8.shtml

There are several possible causes for "memory card locked", "memory card error", or "no memory card". The most common is trying to use a 4GB or higher SDHC card with an older camera made before SDHC format came out. Other causes include problems with the tiny slide switch on the side of the card, or the electrical contact switch internal to the camera. The problem may also arise from simple formatting problems if the card has never been formatted in the camera (note that this will also erase the card). Troubleshooting tips for this problem may be found at this link.