20 Most Recent HEWLETT-PACKARD CP1025 Laser Printer Questions & Answers

try with different tonner if same its the fuser

typically a fuser error

Hello, Please download and run the HP Print and Scan Doctor from www.hp.com/go/tools

Black ink printing on the reverse? On the wrong side of the page? I hate to ask, but is it possible that the labels just need to be turned the opposite way when you put them in the printer?

Its common problem in T Series Plotters: Cause of malfunction: These plotters having separate sheet path as well as roll path for print media. After initializing plotter its verify the available media(sheet or roll). If sheet path is occupied by the media it wont allow the roll media, means first priority is for sheet.If sheet path paper sensor dusty or malfunction, printer will say "remove paper from sheet path" even no paper in sheet path.. How to shoot this problem: You need to clean sheet path sensor located at sheet loading area.(black 'U' shaped part) Applying the pressured air at sensor is the best method to clean.. If problem remain you need to remove the sensor & clean or replace it. Follow the snaps: Need to open roll feed right side portion Clean the IR sensor... Fix it back.. Note: Technical knowledge required to understand the remedy..

1. Might be small paper peaces stucked inside. 2. Paper path sensor(any one) flag broken/displaced/spring displaced..chk..