Top 20 Sansui HDLCD3250 32 in. LCD TV - Page 7 Questions & Answers

http://www.vintageshifi.com/repertoire-pdf/Sansui-3.php Similar model G-E750 link has a schematic. Please click Helpful or Not Helpful to respond to this suggestion.

Go to HiFi Engine and you can find it there

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. https://homenol.blogspot.com/ http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board./

Do you have a multi meter and able to take some voltage readings?

Sansui HDLCD3200 Owner Manual Troubleshooting Free manual with some Troubleshooting steps.

Go into menu then service options click on normal for picture flip, and it will go back to being right

Contact Sansui

https://www.manualslib.com/products/Sansui-Rz-7700av-8659149.html

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock and to set the device region free procedure of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.

Contact Sansui or purchase the schematic, I don't think your going to find anyone with the information you need on here as if it has a vertical out IC its a really old set.

hi Tanya. this link might be of help. How to Connect Galaxy Device to TV with USB or this. Can plug my tablet in the back of my sansui tv in the usb port and play...

Chances are it will blow the fuse again if you replace it, a replacement power board should fix it, for future reference its not a good idea to run sensitive electronic equipment on a generator

Sounds like a backlight problem. I would get the TV replaced under guarantee, as it is less than a year old

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

You must have a remote to get out of the screen.

Press the ADJ (adjustment) button If it asks for a password, enter 0413 This will take you to the Factory Mode Adjustments menu Trace Tool Option 5 and enter (In the video its the fourth option) Go to Mirror Mode and Change the value you see It doesn't matter which state it is in if its On change it to Off and vice versa Switch Off the TV and ON again for the changes to take effect. That's it the picture will be the right way up.

2200 microfarads 25 volts

Your set is probable defective

Call Sansui tech support, they should be able to guide you on this or if its easier take the set back and get a new one if its only a few days old

Do the lines go away after 20 mins?