20 Most Recent
Samsung DMT400RHS Builtin Dishwasher - Page 5 Questions & Answers
Samsung dishwasher stuck in drain cycle eaven with door open and normal and heavy lights blinking
If your dishwasher is stuck in the drain cycle and the lights are flashing, it may be due to a faulty drain pump. You should check the drain pump and hose for any blockages or clogs. If these parts are clear, then the next step is to check the wiring between the dishwasher and the drain pump. If there is a loose wire or a broken connection, then this could be causing the issue. If the wiring seems fine, then the issue may be with the control board or the drain pump itself. If this is the case, then you will need to replace either of these parts to get your dishwasher back to working order.
2/22/2023 7:08:26 PM •
Samsung...
•
Answered
on Feb 22, 2023
The third rack on my Samsung dishwasher no longer pulls out all the way.
It sounds like there may be an obstruction in the glide track that is preventing the third track from moving freely. Here are some steps you can take to try and resolve the issue:
- Check for obstructions: Take a close look at the glide track where the third track is getting stuck. Look for any debris or objects that may be blocking the track. You can use a flashlight to help you see better. If you find any obstructions, carefully remove them.
- Clean the glide track: Even if you don't see any obstructions, the glide track may be dirty or have accumulated debris. Clean the glide track with a soft cloth and a non-abrasive cleaner to remove any buildup that may be causing the third track to get stuck.
- Lubricate the glide track: If the glide track is clean and free of obstructions, it may need to be lubricated to help the tracks move more smoothly. Use a silicone-based lubricant, such as WD-40 Silicone Lubricant, to lubricate the glide track. Apply a small amount of lubricant to the track and use a soft cloth to spread it evenly.
- Check the glider tracks: If the above steps do not resolve the issue, the glider tracks may be damaged or misaligned. Check the glider tracks to see if they are bent or damaged in any way. If so, they may need to be replaced. If the glider tracks are misaligned, adjust them so that they are straight and parallel to each other.
If none of these steps resolve the issue, it may be worth consulting with a professional technician or contacting the manufacturer for further assistance
2/17/2023 2:26:17 PM •
Samsung...
•
Answered
on Feb 17, 2023
Samsung dishwasher dw80h9930us diagnostic mode e3
Hey Randy, thank you for the query. According to my research the E3 error code means that your dishwasher is unable to fill with water. To fix this problem, turn the water supply off and unplug your dishwasher from the power socket. You can then remove the water hose and check the water inlet valve to ensure it's working correctly.
9/25/2022 6:09:06 PM •
Samsung...
•
Answered
on Sep 25, 2022
My Samsung dishwasher dw7933lrabb does not have power. There is power going into the unit, but nothing will turn on
Hello. You question is partially vague but I will try to give you some insight into possibilities. If you're sure power is reaching the washer(checked the ac connections at the base to make sure 120v is present) then next, are there ANY lights illuminated on the front panel? If there is nothing lit, then there is a strong possibility of a blown main control board and/or user interface(the push-button panel *you* choose options from). Now, if there are lights lit and when you hit start, nothing happens, the door switch could be the culprit--its a safety feature that prevents anything from turning on while the door is open. Sometimes, liquid can get spilled into the opening for the latch and drizzle down into the electric lock mech causing a malfunction. Have you had a power outage recently? If the answer is yes, then the main board or user interface could have been damaged--if the current surge doesn't blow out the appliance immediately, *usually* about 3-4 weeks after the episode things will start happening or *not* happening with appliances due to damaged chips on the boards starting to fail. The user interface board is dd92-00030A. The main control board is dd92-00033a. I hope I helped you!
12/8/2021 2:46:36 AM •
Samsung...
•
Answered
on Dec 08, 2021
Not finding what you are looking for?