Top 20 Alcatel OT880 Cell Phone Questions & Answers

try to connect it to a pc using a usb cable. remove the battery

Try this site: http://www.guaranteedunlock.com/Alcatel-OT-806?filter_name=ot-806Hope they can help.

Your cell phone may be locked to a particular cell phoneprovider and in this case it needs to be unlocked to use with a different cellphone service provider.To get the security code/restriction code to unlock the cellphone from the current cell phone provider so you can use the SIM card with adifferent phone provider, Please click on this link and follow my instructions:-http://www.fixya.com/support/r4049238-unlock_cell_phoneIf yourphone provider does not help you then these WEB sites it provides securitycodes for a small price.http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHwhttp://www.mobileunlocksolutions.com/

change your mobile ear piece

try code from service provider.

Fixya does not assist in the breaking of a phone's security nor provide assistance to do so.

Here is a couple of answers; https://www.fixya.com/support/t23762460-alcatel_mobile_getting_message_as_pls

It is Muted https://www.google.com/search?q=alcatel+t56+handset+mute+problem ..

The Unlock code is the one that you or the previous owner put on it. There is no way to know what code you put on it. The only way to fix this is to do a Factory Reset and scrub it clean of all data and reload the operating system clean with no lock code.

How to Reset an Alcatel Phone: 11 Steps (with Pictures)

wikiHow https://www.wikihow.com > ... > Cell Phones 11 steps 1. Turn off your Alcatel phone. Tap and hold the Power button until the screen shuts down. When the screen completely fades to black, then it is already off ... 2. Press and hold the pound (#) key and Power button at the same time for about 3 to 4 seconds. You will be prompted that all the data will be deleted. If ... 3. Select "Yes" to delete all data. Use the phone cursor on your keypad and scroll down to the "Yes" option. Press the OK button to select it. The OK button is ...

How to Perform Hard Reset Tracfone Alcatel A206G Flip ...

TracfoneUserManual.Net https://tracfoneusermanual.net > hard-reset-tracfone-al... Hard Reset Alcatel A206G · Make sure to turn off the phone first. · Press "Power button" and "*" button for a couple of second. · A warning will show up asking if ... .

The network key is a code that is used to unlock your phone's SIM card for use with a specific network carrier. If your Alcatel one touch is asking for a network key when you insert your SIM card, it means that your phone is locked to a particular carrier, and you need to get the unlock code from the carrier or a third-party provider. To get the network key, you will need to contact the carrier that the phone is locked to and request the code. If you have completed your contract with the carrier, they may provide you with the code for free or for a fee. You will need to provide them with your phone's IMEI number, which is a unique identifier for your phone. If the carrier refuses to provide the network key or you don't want to pay the fee, you can also try third-party providers. These providers can unlock your phone for a fee, and they may provide you with the network key. However, be cautious when choosing a third-party provider and make sure they are reputable and reliable. Once you have the network key, you can enter it into your phone when it prompts you to unlock the SIM card. To do this, go to the phone's settings, then to the network settings, and look for the option to enter the network key. Enter the code, and your phone should be unlocked and ready for use with your SIM card.

If your incoming calls are going to messages and the volume is lower than usual, it could be due to a problem with the phone settings. Try checking the volume settings on the phone, and make sure the volume is not turned down too low. Additionally, you may need to check the settings for your phone's voicemail, and make sure that your voicemail is not set to kick in after a certain amount of time. If these settings don't help, then you may need to contact your phone's manufacturer for further assistance.

Unfortunately, I cannot provide you with the RCK and NCK codes for your Alcatel modem. These codes are specific to your device and are not publicly available. You will need to contact your service provider or the manufacturer of the modem to obtain these codes.

Question edited for clarity and correct name of the phone. Question moved from Land Phones to Alcatel Cellphone. The A3 has Do Not Disturb, but the Flip doesn't. Your phone is very basic. Here is the manual https://www.metrobyt-mobile.com/content/dam/mpcs/faqsandsupport/alcatel/Alcatel-GO-FLIP-3-UserGuide.pdf So not ringing is likely caused by turning the volume down to off. https://www.google.com/search?q=alcatel+go+flip+3+not+ringing ..

Contact the SIM card provider for prices and details.

Hello Michael Add the Alcatel model number to this Google search query, or you can also Google 'make model manual'. There are videos in the link that may help. https://www.google.com/search?q=alcatel+%28model%29+phone+enter+pin+code ..

The only way to get into it without the FRP is to delete all data with a factory reset.

I thinks that the battery was never charged. Even though it might have been plugged in sometimes the rating is not strong enough to charge the device. When you try to power it up it turns off because it was never charged .

https://www.google.com/search?q=Ussd+codes+Alcatel+1b ..

It seems a known issue. You could use the speaker or use a Bluetooth earpiece. Did you increase the Volume whilst ON a call? Otherwise you are just turning up the ringer volume. https://www.google.com/search?q=Alcatel+TCL+A3Y%2C+low+volume ..