20 Most Recent Symbol PDT 3100 - Page 2 Questions & Answers

The way the scanner reacts to the buttons depends on the software that is installed.But the fault you are describing tends to be the scan head flexible cable is broken. i can fix it. please send it to Pen Mobile via Google search and quote my name David Germain.regardsDavid Germain

Hi Michael,Sorry I could not login to Fixya yesterday,otherwise you should have received the reply mail early, but I just got busy due to some family problems.Anyways, the product you have mentioned is PDT 3100 and you got to understand a few technical things which I would like to share with you now. First of all the PDT 3100 is 10 years old which is pretty older than the Operating System you are using which is windows 7 which is only 3 years old in market.What I am trying to say is any hardware device needs a driver software to run in a PC but the driver software which your device has was Last modified in 2004 so it is obvious it does not support windows 7. Pleas check the detail here: http://support.symbol.com/support/browse.do?WidgetName=BROWSE_PRODUCT&TaxoName=SG_SupportGoals&BROWSE_PRODUCT.isProductTaxonomy=true&BROWSE_PRODUCT.NodeId=SG_PDT3100_1_2&BROWSE_PRODUCT.thisPageUrl=%2Fproduct%2Fproducts.do&id=m4&BROWSE_PRODUCT.TaxoName=SG_SupportGoals&NodeType=leaf&NodeName=PDT3100&BROWSE_PRODUCT.NodeType=leaf&NodeId=SG_PDT3100_1_2&AppContext=AC_ProductPage&param_document=spAlso download the software from here: http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=KB100172&sliceId=&dialogID=261780565&stateId=0%200%2041932917Please read the instructions carefully and download the software and install it.Don't get disheartened, install the software and see what you get, but I feel technically it should not work. but it will work on any Windows XP PC.so, if you have another PC with windows Xp your device will work.Thank you for purchasing my service, i will be more happy if I can assist you even better.Do revert back if you face any further issue with the same.Thank you one again.

please contact me for assitance with the repair. we specialise in the repair of legacy barcode scanners and terminals. [email protected] 00441179064587

PLEASE CONTACT [email protected] for technical support

please contact [email protected] we specialise in the repair of legacy barcode terminals and scanners. 01179064587

if it is stuck in command prompt (DOS) carry out the following to get the system to reboot.Power off the reader. Press folowing key and maintain them pressed: "Func" "Space" "M" "Power", release "Power" and release other keys. Now the system is reset.

Hector - do you have the full part number from the back of a working unit plus when you load the unit does it show the firmware version required? Do you also load bespoke software onto the device? thanks [email protected]

are you recieving a full error message? What is the part number on theb ack of the unit. We specialise in legacy products and systems. We sell PDT3100's fully refurbsihed

The terminals use DR Dos as operative system. Anything you want to download to them normally has to be built into a hex file and you will need a cradle, a null modem cable and winhex or the old dos command called sendhex.exe.

Is it a pdt 3100, 3140 or 3146?

I can send you the operative system files if the terminal is a 3140 or 3146 or you can do a search on the web for LWP and UPD.

Boa noite
Eu tenho um igual e de vez em quando acontece-me o mesmo, como consigo resolver a situa??o, ? precionar a ficha RJ enquanto o PDT est? a transmitir para o PC.
Se pretender tocar mais ideias o meu mail:[email protected]

1. hi,
   

   please follow the given link ,you wil find the solution of your problem ,step by step.
   

   please also follow the instructions.
   
   
   

   http://www.ehow.com/how_7184696_reboot-pdt3100-symbol-barcode-scanner.html
   

   Good luck
   

hi does your PDT 3100 have the Oneil's RSwin software if it does i can trade your PDT's for new ones. is the one that says Login Electronic Picklist record center Ops etc. etc. [email protected]

You need a cradle, a null modem cable, a pc running dos and the command rcvhex.exe which you can download from the net.

If you can get all this together, get back to me and I will give you full instructions on the process.

Hola dlujan. Usted está utilizando tft3000 en DOS, ¿correcto? Compruebe y asegúrese de que su PDT3100 está en el puerto COM1. Luego de verificación para asegurar que el programa DOS está tratando de recibir los datos de COM1. Si eso no funciona, entonces usted querrá tratar de volver a instalar su software en tanto su PDT3100 y su PC. Espero que esto ayude. Buena suerte!

I would like to suggest since you are approaching to GUI enviroment you need to develop system build by visual basic using MSCOMM control by sending and receiving data between PDT3100 and PC.

Please try to visit www.planetsourcecode.com for best VB tutorials about how to use MSCOM1 or hire/chat me if you need my further assistance.

Good luck,

Philip

tecla F+tecla J+ tecla PWR

hi

go to following link you will get all the software along with Manual

http://support.symbol.com/support/browse.do?WidgetName=BROWSE_PRODUCT&TaxoName=SG_SupportGoals&BROWSE_PRODUCT.isProductTaxonomy=true&BROWSE_PRODUCT.NodeId=SG_PDT3100_1_2&BROWSE_PRODUCT.thisPageUrl=%2Fproduct%2Fproducts.do&id=m4&BROWSE_PRODUCT.TaxoName=SG_SupportGoals&NodeType=leaf&NodeName=PDT3100&BROWSE_PRODUCT.NodeType=leaf&NodeId=SG_PDT3100_1_2&AppContext=AC_ProductPage&param_document=sp