Symbol LS 4000i Handheld - Answered Questions & Fixed issues


Hi

Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Symbol LS 4000i... | Answered on Jan 20, 2015 | 68 views


Hi
Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Symbol LS 4000i... | Answered on Jan 19, 2015 | 100 views


Carl

Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.

Mark
Motorola Mobility Support

Symbol LS 4000i... | Answered on Jan 19, 2015 | 85 views


Someone mistakenly added a character before the data during the configuration.You may try factory default setting using configuration barcode.

Symbol LS 4000i... | Answered on Jul 28, 2014 | 154 views


Hi,

This can be possible, therefore it is not an Excel setting. You would need
to use the software that comes with your bar-code reader to configure this.

Try looking in your bar-code reader documentation for "Append Enter" or
"Append Carriage Return"

Symbol LS 4000i... | Answered on Jan 30, 2013 | 2,545 views


Hello, it looks like the scanner lost the settings. As power is there, so connection is ok. The several (four) beeps after reading the barcode means communication error.
Please try to find the original sheet with configuration barcodes or download it from support.symbol.com website, you would need to scan the barcode for IBM PC/AT & IBM Compatibles from Keyboard Wedge Chapter.

Symbol LS 4000i... | Answered on Dec 07, 2010 | 1,883 views


Hello Jane Diaz,
the scanner has several barcode types enabled by default. Other type or lengths must be activated with an programming barcode from the Programm Reference Guide for LS4000.
Please check which kind of barcode are you using. Download the Program Reference Guide from support.symbol.com Scan the barcodes from the chapter Symbologies

Symbol LS 4000i... | Answered on Dec 05, 2010 | 980 views


You are able to purchase a USB cable from symbol that will take the place of your current cable.

Symbol LS 4000i... | Answered on Oct 27, 2010 | 605 views


hello, what scanner do you have? Did you scan the barcodes in the quick ref guide to set up the scanner? If not, you will need to go to the the manufacture website, and download teh quick referenece guide then scan the barcodes in the book that is designed for your set up

let me know if i can be of additional assistance:
Thank you,
Kim Ganoe 800.933.2839 x251

Symbol LS 4000i... | Answered on Mar 24, 2010 | 514 views


Hello Metro9. It sounds like something has gone haywire in you unit's configuration. We have the LS4000i manual available on our website. Have a look at it and go to page 5-6 for the "Set All Defaults" barcode. Printing this page and scanning the barcode will reset all of the settings on your LS4000i to it's default settings which are listed on page 5-1. That would be resetting the scanner. If you have any other problems, feel free to send me a message or email and I'll be happy to help. Good luck!

Symbol LS 4000i... | Answered on Jan 01, 2010 | 720 views


You can create a barcode in Code 39 that contains $M. Then scan the Enable Code 39 Full ASCII barcode from the Symbologies section of the LS4000 Series Product Reference Guide (Adobe page 93 of 182). If you are unable to create the barcode Knowledge Article ADC-00266 contains the $M barcode. You may run into problems with your application if it does not see a Control M as an Enter. If this is the case the article contains instructions for addressing this problem as well.

Symbol LS 4000i... | Answered on Nov 11, 2009 | 370 views


LS4000i does not work with USB or RS232. It is an undecoded (dumb) scanner you need a LS4004 to work with RS232 and special STI adaptor for anything other then 4006, 4007 and 4008. You can always contact me by phone or email 630-622-2024 akowalski@legacyglobal.com Please visit our website www.legacyglobal.com

Symbol LS 4000i... | Answered on Oct 20, 2009 | 752 views


The LS 4000i is available with several different interfaces.

LS4004i - RS-232/Serial interface
LS4006i - Keyboard Wedge interface
LS4007i - USB interface

Symbol LS 4000i... | Answered on Oct 27, 2010 | 645 views


Disconnect the scanner from the mouse port or disconnect the mouse from the scanner. The scanner must be connected to the keyboard port and have a keyboard attached to the scanner.

Symbol LS 4000i... | Answered on Sep 17, 2009 | 671 views


There is no such bar code. barcode scanner scans any barcode and give the result.
scanner can scan in any software. eg. excel,word. dos etc.

Symbol LS 4000i... | Answered on Aug 08, 2009 | 1,019 views


You need to set up the "HOST" parameter. Symbol Scanners are set up with barcodes. You will need the Product Refrerence Guide. Go to http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3789802apdf&sliceId=&dialogID=118892050&stateId=0%200%2012121222 and download the manual. If you can't figure it out, call 1-800-653-5350 (Symbol Help Desk) and they will walk you through it.

Cheers.

Billy Barcode.

Symbol LS 4000i... | Answered on Aug 05, 2009 | 448 views


you need to download the pdf manual for this reader whichh you can find in the support page of www.symbol.com.
search within the manual a barcode called set all defaults. this will remove the carriage return after scan.


Symbol LS 4000i... | Answered on Jun 15, 2009 | 298 views


There is more than one way for that imager to send data to the computer. Are you using USB, serial, or is there a little box that goes between your existing keyboard and the PC that accepts the scanner connector?

Symbol LS 4000i... | Answered on Dec 04, 2008 | 4,684 views


you should have a code book that came with the scanner, the code book allows you to program the scanner's options, the code book takes you step by step through the programming proccess. each option requires you to scan varios barcodes to "set" the various options one of the options will be to set the barcodes you wish to use, this is set to avoid a misread (confusion between barcode standards)

Symbol LS 4000i... | Answered on Jan 29, 2009 | 396 views


a true relic, 16 years old for sure last one sold new 2011,
support ended 2016 (missed the boat) 2004 first one.
https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html
what PC, name it and the OS, windows xp to w10., what?

you posted to computers so.....

it is a UPC bar code scanner , as seen in STORES check out.
we have no idea what wireless network any one has, until told.
my wild guess is you are not at home.
only the maker support this old UPC scanner

wireless wifi is

WLAN: 802.11a/b/g
WPAN: Bluetooth
only. and only if opted new.
the manual states
Windows Mobile 6.1 or Windows CE 5.0 device:
no story told, found this in a dumpster or garage sale>?
first time ever to attempt to get it to work?
what is you host, A PC? or what? running what os
The do not have drivers for most popular OS, sorry. and not now.
all there is , is here.

https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html#pageandfilelist_4c86

Symbol Computers... | Answered on Dec 19, 2019 | 301 views

Not finding what you are looking for?
Symbol LS 4000i Handheld Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Symbol Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...