20 Most Recent
Symbol LS2208 Handheld - Page 6 Questions & Answers
I have a symbol barcode scanner and want to program it so I
you will need to download the product reference guide from
www.symbol.com . You will find it within the product manuals.
In that guide you will have the barcodes to program this scanner.
You will need the following:
Scan options.
Data - Suffix
TAB.
This will sort your problem. If you don't manage to do it, get back to me and i can find the barcodes and email them to you.
What is the bar code for the tab key
Hi paulajoy. I believe I can help, but I'm not sure what you mean. What are you trying to do? Configure your scanner to put a {TAB} keystroke in when scanning? Or are you just looking for the code for a {TAB} keystroke? If you are just looking for a code to identify it, the ones I know of are: ^I for Character, 09 for dec, and 09 for hex. If you're trying to configure your scanner, let me know and I'll be happy to help you find the right barcodes in the manual.
I have LS2208 PS2 and Nothing is send to computer
have you tried swopping out the cable? If that doesnt work I would just buy a new device. These are cponsidered consumable scanners. When they faile they tend to get replaced because they are so cheap
This will probablly be the
The LS2208 acts as keyboard, so whatever you scan should be directly written to your Desktop PC application. If you installed the 123Scan2 Application, you would need to quit it to start using the scanner. It is an Application to create and save the settings, but it should not run during scanning.
Need carriage return sent after data
Download the product reference guide forr this scanner from
www.symbol.com
Find the following barcodes, print them annd then scan then in this order:
scan options.
data > suffix
Enter.
This should resolve your problem.
How can i activate $I
You will have to download the LS2208 Product Reference Guide and scan the Enable Code 39 Full ASCII barcode from Adobe page 188 of 345. This will make the scanner send a Control I to the application. If your application does not see a Control I as a TAB you will have to enable Function Key Mapping from the USB (page 117 of 345) or Keyboard wedge (64 of 345) section of the manual based on the cable you are using.
I can't set to read
Sometimes it can be something as simple as scanning another code and retrying. Don't forget to scan the save command.
Not finding what you are looking for?