20 Most Recent Hannspree HANNS pad SN10T1 Questions & Answers

same problem no sound not even the clicking as using it. tried turning volume up

Computer's speed [whether it be a desktop or laptop, whatever be] depends on many things. Even with the highest core speed computers too can hang, and go with little speed. In your case, it will be best to contact the authorized service center, or any skilled computer technician to resolve this problem. In most cases, a re-installation of the O/S will resolve the problem. Anyway, contact the authorized service center. It will be best. http://electronicshelponline.blogspot.com/

1. Power off the device. (Make sure to plug in AC power.) 2. Press and hold Volume Up(+) button and Power button at the same time for 5 seconds, and release both buttons to enter system recovery utility. 3. Press Volume button to select " wipe data / factory reset " and press Power button to execute 4. Press Volume button to select " Reboot System Now "and press Power button to execute Hannspree Customer Service at:888 808 6789 (1-909-992-5025 outside of the US); Mon - Fri: 6am - 6pm PST / PDT.

There are several things to remember when purchasing an universal tablet charger. 1. Check to ensure that it is the proper voltage. 2.Always maksure that it is of the same amperage as the one sold for that tablet. and 3. Check to be sure that the polarity is what your tablet is set to. Not all universal chargers use the same polarity, some have a negative ground while others may have a positive ground. If there is any doubt, always consult customer service or customer technical service for the tablet that you are using. Hope This is Helpfull

This is the english version. Http://www.hannspree.com/HSPV3images/Downloads/TabletPC/UserManual/SN10T1/HANNSpad(SN10T1)_UM_EN_v1.0.pdf

Remove the battery cover and remove battery for about 30 seconds. Then replace battery and power up your tablet and see if that does not reset it.

Go to into settings , click on general , scroll around and u should find it !!

hold power button as long as it takes for the tablet to shut off then leave it alone for a few minutes.

Google helps. Google it