20 Most Recent Reebok TR2 PremierRun Treadmill - Page 7 Questions & Answers

1) readjust the speed sensor, clean it and tight the wires connector well2) see the block diagram.3) RUN the software calibration for diagnose, troubleshooting , fix it4) lube the gear and shift elevation motor.5) adjust the POT, a little and see if you have a better improve.6) see the diagram, and proceedGod bless you

Hi, Our Z9 has just done the same, switched on the power but it doesn't turn on. Was just wondering if you managed to fix yours and if so how? Thanks.

Contact Reebok and ask them: http://www.reebokfitness.info/contact-us

Check this link for the manual of this treadmill: Reebok 8400c Treadmill Manual Treadmill Lights Up But Fan And Belt Wont Run

what motor are you adding a batttery too? car,toy,cellphone ext;

Try http://www.treadmilldoctor.com for parts.

usually when a treadmill begins to make a squeaking sound it means that the belt needs to be lubricated. Try Treadmill Belt Lubricant available at Canadian Tire for $10.99 and is good for Reebok treadmills.

Ouch, well I am assuming it doesn't start the walking belt until the Start button is pressed, then speeds up to Max? Uncontrolled speed, or what manufacturers dislike, Runaway, is a sign of a failed (shorted) FET on the motor control board. Reebok is an Icon Brand and you might find a replacement or repair thru jatinah electronics who services all styles of controllers and has some exchanges available for as little as 75 and a returned core. Good luck!

What is the frequency of the knock? Is it every second, few seconds, or very fast? This can tell if it has something to do with the track or the motor.

I would say the blown fuse was definitely "a" problem but not necessarily THE problem. Something caused the fuse to blow and it is likely with the belt drive system as the lift was still working. Look for burned or shorted places on the PCB and check the motor. You will definitely need another fuse - get 3 or 4! There are several motor troubleshooting vids on utube. If this one isn't helpful, try some others.

I do not think you can , you must replace the switch

i want to purchase dc motor 3 hp continues duty 230 v dc power supply and 4800 rpm form my treadmil. please suggest. i am in chandigarh India.

ck youtube or do a google search that is your best bet , good luck. goto their website and see if they have one

its either on the side of the uprights or on the lifting rod itself

Do you the model and brand of your machine.