Juki DDL8300N Sewing Machine - Answered Questions & Fixed issues

whether its bias or straight does not matter to machine. loosen the bobbin tension and put more tension on take up spring by inserting a screwdriver in the slot of the top thread tensioner. turn to right.

You may download a copy of the Janome MC300 manual at http://content.janome.com/documents/File/ManualFile/Inst%20book%20MC300E.pdf

Please explain further. What do you mean by "Start up"??

try adjusting the top thread tension and see if that helpsalso try changing the thread.also change the needle--make sure it's the right needle for the fabricbeing sewed.

Increase the pressure on the presser foot.

Errors are listed in the Engineer's Service Manual https://www.manualslib.com/manual/1071191/Juki-Ams-210e-Series.html?page=203 More here https://www.google.com/search?q=Juki+AMS+210B+Sewing+Machine.+It+crashes+with+Error+1 ..

https://jukiamericas.com/pages/supportif you live in the USA or https://jukiindustrial.co.uk/support/ for the UK and Europe.

You should make sure it is grounded. Also, is it getting oil from the pan? Blown fuses usually mean there is an overload in the motor. Check that the belt is not too tight.

Juki flora 5000 manual parts details

See Jiku Website. You can download the required manual by giving type of machine, model number etc. Juki-Manuals (jukilanka.com) There are more than 400 manuals on this site. You can find your required manual. Juki manuals

Question edited for clarity, toss in CAPS and add the magic word. Manual https://www.juki.co.jp/household_en/hsm/pdf/HZL-L%20Series_EN_inst.pdf More here https://www.google.com/search?q=juki+jureve+hzl-010N+manual ..

Sc1 error 26 code 1769160

Question edited for clarity Information, manuals and videos https://www.google.com/search?q=juki+mo-2316+how+to+oil+the+machine ..

I am not familiar with this particular machine, but I found references to the thread cutter. Did you try turning it off? Could the cotton thread be rotten, have you tried sewing with button thread? Thread Trimming Function correlates with the scissors icon on the face of the machine. The G210 in unique in the fact that it has this function, which will automatically trim the thread for you, leaving virtually no mess! This one is a life saver as it relives you from having to spend time cutting and cleaning loose threads! The text above was from here https://www.instructables.com/Juki-Sewing-Machine-1/ More here https://www.google.com/search?q=Juki+HZL+G210+trimming+thread+while+sewing ..

Question edited for better English. It appears to be an old style Floppy Disk. https://www.google.com/search?q=juki+jureve+hzl-010+memory+card

See the error code list and remedial actions on this page drive01_error.pdf (juki.co.jp)

There is a problem with the motor. Check your connections of wiring and such to make sure they are secure. The problem might be the brushes or might be the circuit board to the motor. Look for signs of damage or wear on that main circuit board. If found, replace the board. If the problem is not then resolved, you might contact Juki customer support. This is not an inexpensive machine. https://jukiamericas.com/pages/support https://www.citysewingmachine.com/products/juki-ddl-5550n-7-lockstitch-machine-setup-on-table-servo-motor-stand.html https://www.manualslib.com/manual/940610/Juki-Ddl-5550n-7.html

If your JUKI HZL-DX7 sewing machine's automatic thread cutter is leaving behind a short piece of thread in the mechanism after each cut, there might be a few potential causes for this issue. Here are some steps you can take to troubleshoot and address the problem:

1. Thread Tension: Check the tension settings for both the upper and lower threads. Improper tension can cause thread to be left behind in the thread cutter mechanism. Make sure the tension is balanced and appropriate for the type of fabric you're sewing.
2. Thread Quality: Poor-quality or thick threads can sometimes get caught in the thread cutter mechanism. Ensure you're using good-quality threads that are suitable for your sewing project.
3. Thread Path and Thread Guides: Make sure the upper and lower threads are properly threaded through the machine's threading path and guides. Improper threading can lead to thread buildup in the cutter area.
4. Thread Cutter Mechanism Cleaning: The thread cutter mechanism might have accumulated lint, debris, or bits of thread over time. Gently clean the thread cutter area with a small brush, compressed air, or a vacuum cleaner to remove any buildup.
5. Blade Inspection: Check the blade of the thread cutter for any nicks, dullness, or damage. A damaged blade might not cut the thread cleanly, leaving behind remnants.
6. Thread Cutter Mechanism Lubrication: Some sewing machines have small moving parts in the thread cutter area that benefit from occasional lubrication. Consult your sewing machine's manual to see if lubrication is recommended and use a sewing machine-safe lubricant if needed.
7. Machine Maintenance: Regular maintenance of your sewing machine, including cleaning and oiling as recommended in the manual, can help prevent issues with the thread cutter mechanism.
8. Consult the Manual: Refer to your JUKI HZL-DX7 sewing machine's manual for specific instructions on troubleshooting and maintaining the automatic thread cutter.
9. Professional Service: If the issue persists after trying these steps, it might be best to seek the assistance of a professional sewing machine technician. They can diagnose and repair any mechanical issues with the thread cutter mechanism.

Remember that working with sewing machines involves mechanical parts and electrical components, so it's important to follow safety guidelines and, if needed, seek professional assistance to avoid causing further damage or harm.

Engineers Service manual. This page lists the error https://www.manualslib.com/manual/1605037/Juki-Ddl-9000c-S-Series.html?page=134 Reset Key https://www.manualslib.com/manual/1605037/Juki-Ddl-9000c-S-Series.html?page=92&term=reset&selected=5#manual I would have thought the wheel would always turn manually. Standard procedure for a jammed machine is to force it in the normal direction of travel.. I can't think or any logical reason for the machine to lock the handwheel when switched off and a mechanical jam would be the reason for the motor overload. https://www.manualslib.com/manual/1605037/Juki-Ddl-9000c-S-Series.html?page=71&term=turn+handwheel&selected=1#manual ..

When experiencing a sewing machine jam and encountering an error message like "lower pressure foot" on the Juki HZL-F600 Quilt & Pro Special, it indicates there may be an issue with the machine's threading, bobbin, or pressure foot. Here are some steps you can take to troubleshoot and resolve the problem:

1. Rethread the Machine: Start by completely rethreading both the top thread and bobbin thread. Ensure that the threads are properly seated in the tension disks, thread guides, and the bobbin case. Follow the threading instructions in the machine's user manual to ensure correct threading.
2. Check the Bobbin: Remove the bobbin and inspect it for any tangles, knots, or thread buildup. Clean out any lint or debris in the bobbin area. Make sure the bobbin is wound correctly and placed in the bobbin case with the thread feeding in the correct direction.
3. Verify the Pressure Foot: Double-check that the pressure foot is properly attached and lowered. Ensure that it is securely in place and there are no obstructions preventing it from making proper contact with the fabric.
4. Adjust Thread Tension: Incorrect thread tension can also cause sewing issues. Experiment with adjusting the tension settings on the machine to find the optimal balance for your fabric and thread. Refer to the machine's user manual for guidance on adjusting thread tension.
5. Clean and Lubricate: Regularly clean and lubricate your sewing machine to ensure smooth operation. Follow the manufacturer's instructions for cleaning and lubrication, and pay special attention to the bobbin area and the needle area.
6. Seek Professional Assistance: If the issue persists after attempting the above steps, it is recommended to contact a qualified technician or the Juki customer support for further assistance. They can provide specialized guidance and troubleshooting specific to your Juki HZL-F600 Quilt & Pro Special machine.

Remember to always consult the machine's user manual for specific instructions and guidance. If you're uncertain or uncomfortable performing any troubleshooting steps, it's best to seek professional help to avoid potential damage to the machine.