Top 20 Ricoh Aficio 1515MF All-In-One Laser Printer Questions & Answers


First download the twain drivers from Ricoh website or if you have cd down load it from it. Then from there when you go to scan should give you selection option for it.

Ricoh Aficio... | 171 views | 0 helpful votes


TD sensor is a electronic sensor that is short term from T-toner & D-density, so the Toner Density sensor is at is says Detects and measures how much and does have a toner in the developer unit.

Ricoh Aficio... | 100 views | 0 helpful votes


The photo conductor is the round drum unit that is light sensitive. The laser in the printer writes an image of what you want to print on the drum and then the toner is applied to the drum and transferred to the paper.

Ricoh Aficio... | 56 views | 0 helpful votes


Laser, inkjet?

Ricoh Aficio... | 56 views | 0 helpful votes


Go to admin settings
or using web browser u can change it

Ricoh Aficio... | 288 views | 1 helpful votes


It's either 0000 or 1111

Ricoh Aficio... | 214 views | 0 helpful votes


press clear mode then press 1 then press0 then press 7 then press stop button hold down for 5 seconds should see display say 1copy press 1 then press 7 ok then press 810 press ok follow instructions.

Ricoh Aficio... | 140 views | 1 helpful votes


Hi there! As you have to understand, i (WE..) are subject to some secrecy about codes...
its not because we enjoy it but , hey, we are dealing with juice.
If all people has access to codes, 4 me its ok! NOTHING to worry about!
Its what you make of them if you dont have a clue what you are dealing with...
You wanna be the nice guy who solve a problem but you run away the net if you f** *** a bad situation
so.. Heres is the access to service mode. But please, and this stand to ALL rookies, this is always goes in your responsibility, so be gentlly.Yellow button, 1, 0,7, and stop (red button)keep this button pressed by 3/4 seconds...
YOU WILL SEE ACCESS TO TECH MODE.WHAT YOU WILL DO FOR NOW ON ITS IN YOUR INTIRE RESPONSIBILITY!
I HAVE BEEN WORKING with ricoh and all machines related ( Rex Rotary, Nashuatec,Etc etc , and also Minolta, Toshiba,Canon, etc , you name it,ive seen them all,... and its about 30 years... but after all, as a tech man, i have to render to a status! Y ou have to had a training course, a problem or two,who made you familior with the machine, and so on ( Is 30 years!!!) and then you play with solutions.4get about newcomers, going to tech manuals and give you the answers already writen there...30 years working on this dont make me an expert, but..advising you not to take the short way...im serious!
I Really enjoy Fixya! And, sometimes,i come here to get a second oppinion, when there is a doubt.so........

Ricoh Aficio... | 72 views | 0 helpful votes


Check fuser roller gear. Hope it will helpful

Ricoh Aficio... | 101 views | 0 helpful votes


542 Fusing temperature warm-up error (center)
The fusing temperature rises less than 7 degrees in 2 seconds, and this continues 5 times consecutively. The fusing temperature is not detected in 25 or 35 seconds. • Fusing thermistor defective or out of position • Fusing lamp open • Power supply board defective
This is the reason for the error code according to (printcopy.info) Might help you in some way, but not my area of expertise.

Ricoh Aficio... | 149 views | 0 helpful votes


Sounds like it thinks there is a jam. Check registeration sensor flag also exit sensor and duplex sensor. Could be dust or fuser sensor out of place or the duplex guide is broken

Ricoh Aficio... | 291 views | 0 helpful votes


Service manual & troubleshooting says this error related to laser unit but this is final solution. To my experience this error mostly because of Micro Door Switchs. Try it by changing Micro Door Switch. I am sure it will help you

Ricoh Aficio... | 112 views | 0 helpful votes


When it say the list can not be used, it means the hard drive/disk thet keeps your addresses have failed. The fast way would be to format the hard drive/disk and re-program your info. This commonly happens when the hard drive/disk is active during a power surge/failure or incorrect shut down. Go to service mode by pressing yellow button then 107 then hold the red/stop button for more than 5 seconds, when the screen changes press the first option on the screen(should be copy or system), now press 5832 (HD format) and enter/execute, when "completed" is displayed switch off and on. Now open your internet browser on PC, take out the web address and input your printer IP and press enter, username-admin, no password, on the left of the screen click on address book, now go to add, input all you info and press ok, now log out on the top right of the screen and test scanner.

Ricoh Aficio... | 2,166 views | 0 helpful votes


Hi! If there is a printer with door problems, this is one! Lets presume you have a paper jam, even if you dont see it. The bit of paper can be stuck in this three points: paper cassete, register sensor and fusion sensor.paper sensor gets damaged very often in this machine but the message will be " out of paper". The register sensor ( it tells the machine the paper arrived to the register roller and it can start cordinate paper movement with scanner movement, a question of syncronous efforts),lyes in the right cover, it looks like two small eyes, they must be cleaned. The fuser sensor, tells the machine the paper arrived there without problems but also says it already got out, once the paper comes out. the fusion must be opened to check this.
Now, this machine have problems in the door switch, you will see a square hole at the left side of the machine (presuming your facing it with the right door open turned to you) somewhere at half way.theres a switch inside that is actuated by a proeminence in the right door, once closed. If this actuator is broken the machine will keep telling you "close right door".If you see its broken, insert a small screw diver and press in, the machine will start to work and the message disapears, If the case, you have to "Reconstruct " the actuator, in order to touch and actuate the inner switch. Sometimes i do this just puting a screw through the plastic. Other choice is to order a new cover, these actuactors are very fragil. Also the latch that keeps door well shut.you wanna try to push the right door in, sometimes is enought. Hope i been helpfull, sorry my (bad) english. Come to me again if you got no improvement.

Ricoh Aficio... | 278 views | 0 helpful votes


Red light all time when ink is finished and refilled it.

Ricoh Aficio... | 4,857 views | 3 helpful votes


Well, the way the question is posed to me, seems very easy to solve that. The machine have two connectors in the back. One says Line and the other says Tel. Just connect the line cable to Line and the telephone in the Tel .The main reason for this two connectors to exist is,the line MUST go to the fax machine first for it to recognize the auxiliary phone, so every time you pick up it, the machine respond to that. As how to operate, memorize numbers, etc, i can only do that by trial, near the machine. You see, in my line of duty, i only repair them, i leave the software for the operator and our rep sales man to deal with. Please try to be more specific. You also have a general functions window,(to activate it, press the white button near the yellow). There you can manage to access, copy, fax & printer details and change them, you can also access the copy (digital) counter. There are a lot of specifications to be adjusted but only in service mode ,reserved, of course, to the technician. Not big secrets, just a bunch of critical data, that, once changed, may leave your machine in a zombie state. Sorry if i cannot be more helpful.

Ricoh Aficio... | 46 views | 0 helpful votes


press the orange key threee times and enter 107 and then press and hold the stop key for about five seconds.
the machine then takes you into the sysytem. select sp mode on the screen. put off the machine for a minute and put on again

Ricoh Aficio... | 1,062 views | 0 helpful votes


Is the gateway set correctly on the machine?

Ricoh Aficio... | 51 views | 0 helpful votes

Not finding what you are looking for?
Ricoh Aficio 1515MF All-In-One Laser Printer Logo

297 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aficio Ricoh

  • Aficio Ricoh

Most Popular Question

error code sc 120

  • Office Equipment & Supplies
Loading...