Top 20 Ricoh Aficio 1515MF All-In-One Laser Printer - Page 2 Questions & Answers

get yourself a new power supply for your laser printer they are available

If the printer came with operating software you should use it to scan the document. Even without the manufacturer software (but not the drivers) you can use Acrobat or Word Perfect or LibreOffice to scan to the application then save the scanned file either as pdf, image format, or as text (OCR).There are some free scanning software available on the Internet: freeOcr, pdfViewer, Paperscan Free edition They are usually able to send the file to an application or save in a specific format. If they are not able to scan a multipage document you will have to scan one page at a time then assemble the pages

123 button - system settings - administrator tools, then address book management. delete the persons entry in here

procedure for reset this firstly enter in service mode. Procedure[ press yellow all clear button>press107>press clear/stop button hold until 4 second. you enter in service mode. than machine off and on.If your problem is not solve so firstly enter in service mode. than press 1 > select [mode] with up down arrow key> than select [memory all clear] with up down arrow key> press [execute] press OK than machine off and on. or some cases replace thrmister.

This page of the manual seems to discuss the problem: http://www.manualslib.com/manual/314275/Ricoh-Aficio-1515.html?page=46

Clean MBU interface. Clean with dev. Make sure you can see gold pins. Clean male adapter on MBU board with dev. Pic : SP201 ricoh MBU clean up with dev.

you mail us [email protected] - we also suplly and fit pcu's

Print the copy counter of the machine, check if the life of the drum unit is already reached. If the drum is ok, then you have to clean the laser unit. maybe dirt is blocking the light coming from the LD unit.

hju

He asked for 64 bit... sir!

Good morning,I need help, my Ricoh Aficio 1022 with this error SC-392 is an error of sensor density toner.I've only had the unit for another and still the same, and the unit is running on another machine.Already cleaned the connectors UnitPlease if someone can help me.E-mail: cybercopy.udi @ hotmail.com

Sorry you cant do it,

GoDaddy Customer Care Number

If you are using an LDAP server to provide the destination, you may not have the Search Conditions programmed correctly.

which machine ?

Hello, try this link please: http://www.ricoh-support.com/enduser/downloads/downloads.asp?fileid=14359&ricohmodelid=6178&url=http%3A%2F%2Fsupport%2Ericoh%2Ecom%2Fbb%2Fhtml%2Fdr%5Fut%5Fe%2Fre%2Fmodel%2Fx15%5F15f%2Fx15%5F15fen%2Ehtm

http://www.ricoh-support.com/enduser/downloads/downloads.asp?fileid=14359&ricohmodelid=6178&url=http%3A%2F%2Fsupport%2Ericoh%2Ecom%2Fbb%2Fhtml%2Fdr%5Fut%5Fe%2Fre%2Fmodel%2Fx15%5F15f%2Fx15%5F15fen%2Ehtm

The PC unit is user replacable. The life of the unit is 45000 impressions. Customer cost for the unit is $213.52 + tax. It can not be reset but if your copy quality is OK it dosn't hurt to run the machine as is. When you start experiencing quality problems you will have to replace it. Just contact your local RICOH authorized dealer and order the part. It will come with installation instructions.

The power supply unit within the printer also would have damaged while the surge took place . The SMPS - the power supply - is quite sensitive to the power surge and so could have damaged the driver or the front end . you need to take a look at the SMPS unit to confirm. remove the power supply and check for fuse, if the fuse blows again then you have a problem in hand.
check the link for tips:

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies