Top 20 Ricoh Aficio 1515MF All-In-One Laser Printer - Page 8 Questions & Answers


Turning the main power switch off and on, resets the SC code if the error is caused by incorrect sensor detection.
If the error is still there, the laser synchronising detector or laser diode is faulty. Please call a service engineer.

Good luck and please rate me, thanks.

Ricoh Aficio... | 670 views | 2 helpful votes


Press USER TOOLS

Ricoh Aficio... | 344 views | 0 helpful votes


Please browse link below and download manuals;

http://www.ricoh-usa.com/downloads/manuals/bw/aficio1515/

Good luck and please rate me, thanks.

Ricoh Aficio... | 398 views | 1 helpful votes


Depends on whether you go compatible, or Oem. Although i use a lot of compatibles for various makes of equipment, Ricoh is very sensitive, and I don't find they work very well, so I would stick with Oem. Bottle is around $45-$50CDN

Ricoh Aficio... | 104 views | 0 helpful votes


Go to this link, and click on "How to clear misfeed a,p,y"

http://www.ricoh.co.uk/KBase/KBLink.cfm?ProductUID=1878


copy and paste the link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Ricoh Aficio... | 1,162 views | 0 helpful votes


Enter SP mode and select SP5113 - Optional counter type.

Good luck and please rate me, thanks.

Ricoh Aficio... | 893 views | 0 helpful votes


I went to the manufacturers website and accessed the User Manual.

Ricoh Aficio... | 70 views | 0 helpful votes


You need a tech...here is the description of your "SC":
The scanner home position sensor
does not detect the scanner leaving
the home position.

Here are the possible solutions:
- Defective scanner home
position sensor
- Defective scanner drive motor
- Defective scanner home
position sensor connector
- Defective scanner drive motor
connector
- Defective BICU board

Ricoh Aficio... | 7,892 views | 6 helpful votes


use an updated driver version for this machine on ricoh-support.com, another solution is using pcl5 driver as this one does spooling at computer and not machine...

Ricoh Aficio... | 267 views | 0 helpful votes


Should be as simple as turning the machine on and off. There is also a setting in the SP mode for this system. Not sure on what you want to clear.

www.mfpsolutions.blogspot.com

Ricoh Aficio... | 245 views | 0 helpful votes


It must be in DHCP mode. Do you want to set it to a static IP?
"user tools", "System settings", "Interface settings, "Network", "ip address", highlight "specify", then press the button below "ip add", set your ip, press "ok", then press "ok" again with "specify" highlighted to lock in. Exit user tools.

Ricoh Aficio... | 2,032 views | 2 helpful votes


THIS MACHINE SHOULD HAVE 2 ON SWITCHES. ONE ON THE UPPER RIGHT WHICH ONLY TURNS THE LIGHTS OFF TO THE CONTROL PANEL.ON THE LOWER LEFT SIDE THERE SHOULD BE A RED SWITCH THAT IS THE MAIN POWER SWITCH.THE RED SWITCH IS THE ONE THAT RESETS CODES.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Ricoh Aficio... | 138 views | 0 helpful votes


Reset it .
If you are enter service mode 5-912 default 60K just input Zero "0" this will deactivate the PCU counter.

If it is bad you will have to replace it. It is the Photoconductor(Drum / Developer) Cartridge

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Ricoh Aficio... | 657 views | 2 helpful votes


Two items you need to do. Press user tools and go to fax settings from there you need to turn of auto fax reception and change to manual. (keep in mind, that when a fax comes in, meaning you pick up the phone and hear the fax tone, you will need to press the green start button to activate the fax sequence).

Also make sure you telephone is plugged into TEL and phone line into FAX/

www.mfpsolutions.blogspot.com

Ricoh Aficio... | 309 views | 0 helpful votes


I have changed the toner cartridge and the sign to add toner is still on.

Ricoh Aficio... | 538 views | 0 helpful votes


You have to program over the top of it. You need to go into the User Tools and then the address book function.

www.mfpsolutions.blogspot.com

http://www.websitetoolbox.com/mb/copierquestions

Ricoh Aficio... | 30 views | 0 helpful votes


Hello, here is the driver page for you dp1515.
Just choose your language and operating system
Thank you.

http://www.panasonic.net/pcc/support/mfp/dp-1515/download.html

Ricoh Aficio... | 1,967 views | 3 helpful votes


For to use the network printer first of all you should have a network connection port.
If you have one on your printer than you should install a driver on the computer from where you will print then connect the cable with network LAN cable which the one end is connected into the printer and the other into the network switch or router. After this is done go to start menu on you computer than go to printers and faxes and select the printer driver 1515 press the right click and click on properties then go to port and create a TCP/IP port similar to the computer ip address.

EXAMPLE:
if the address on the computer is 192.168.0.100
than put the address of the printer as follow
192.168.0.101

Please look at the paper sheet which is printed from the machine by her self when the machine is turned on for the first time in the day.
There should have a port name which can be 10001 or 9100 or 9101 or similar.
Enter that number in the TCP/IP port properties than go to the machine and press the [User tools/ Counter] key then go to system settings and than network settings and enter there the ip address which you had enter before on the driver in the computer.

Ricoh Aficio... | 853 views | 1 helpful votes


Enter Service program mode > Press Clear mode (yellow) button,
> 1 0 7 and press and hold Stop (red) button.
Select copy SP and switch off and on the machine.
If sc 542 is still there, probably you have a defective thermistor or fusing lamp.

Good luck and please rate me, thanks.

Ricoh Aficio... | 458 views | 0 helpful votes


Finally figured this out!!

Go to: UserTools - System Settings - File Transfer Tab - page 3 of 3 - Auto-Specify Sender Name - <ON>

Ricoh Aficio... | 19,828 views | 50 helpful votes

Not finding what you are looking for?
Ricoh Aficio 1515MF All-In-One Laser Printer Logo

297 questions posted

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

gggg

Level 3 Expert

904 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

quennie732

Level 2 Expert

422 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aficio Ricoh

  • Aficio Ricoh

Most Popular Question

error code sc 120

  • Office Equipment & Supplies
Loading...