20 Most Recent
Ricoh Aficio AP3800C Laser Printer - Page 5 Questions & Answers
Ricoh error code sc291
There's a list of Ricoh error codes right here:
http://www.tecnodigitale.com/riparazioni/pdf/Codici_errore_Ricoh.pdf but it doesn't indicate an sc291 for the 3800 or for any other model for that matter.
There are usually contacts on the cartridge that interface with a reader in the printer to detect the chip in the cartridge. Examine a cartridge and look for any electrical contacts, make sure they don't look damaged or dirty clean them with 98% isopropyl alcohol. With the printer powered off and upplugged, try to find the corresponding contacts inside the printer for each of the contacts on the cartridge, clean those too.
If that doesn't change, try a different cyan cartridge, if that still doesn't work you will probably have to get the machine serviced.
Ricoh mp6500 sc670 error code
sc670 is an engine startup error. A lot of times if you reset the copier (turn it off with the orange switch on the left side of the front cover, then turn it back on) the error will go away. If it doesn't the BCU board may need to be replaced.
How do i connect ap3800
Depending on how your network is set up, you have a couple options. If you have no network, then you can not print unless the machine is equip with a parallel print connection.
Help, my ricoh printer will
Hi, there is an option for how many copies to print in the printer driver. When you hit Print in the program you want to print from, a box of printer options should appear, including which printer you want to print to. There will be a field, probably about halfway down the screen, asking for the number of copies you want to print. Change this to 60 before proceeding and you will make 60 prints of your document or image. Hope that helps!
Ricoh Aficio AP3800c Yellow Toner
Hello there, i have the same problem here, but in the black
toner, i did the same as you and look that we have a clogged
pump or bad pump, the pump is located exactly where the dev.
unit is, but to remove it we need to take the laser unit from
the top cover where the printed pages stack, i'm going to work
in my printer, i let you now if i'm able to unclogg the pump.
I,m a electronic techniccian for Arcade machines(Namco) is the
first time that i work with a laser printer, the pump price is
$171.00, i let you know. Thanks
Miguel
My Ricoh 388 is in need of replacing the fuser unit
Unfortunately, on the AP3800C the oil supply unit is part of the fusing unit. However, you can purchase just the oil supply portion of the fusing unit and replace that (part #G0604022).
I'm not sure how much that would cost, but it's got to be cheaper than a whole new fusing unit.
SC680 error message on a Gestetner DSc38
The machine has a problem reading the memory chip on the toner.
Check if the chip is not lose or damaged or durty
Check the harnass or the chip reader and pins and clean.
Replace toner
after replacing the toner and the problem is still there you can do a engine clear.
contact me
[email protected] for doing engine clear.
Not finding what you are looking for?