20 Most Recent
Fuji Instax 210 Wide Polaroid Camera 80 Films Pen - Page 8 Questions & Answers
I have installed the Fujifilm
is there a import menu in software to open first to import? try to uninstall software and hook camera up generic to usb and power on camera in playback and see if you can import into my pictures first-then import them into fuji program after reinstalling
2/6/2014 3:38:21 AM •
Fuji Cameras
•
Answered
on Feb 06, 2014
Metz 54 mz 3 on X-E2
What do you mean with Adapter?
You know Metz makes a range of Speed lights, for a range of different camera brands. It is not only the hot shoe that looks different for most brands, also the firmware in the Speed light is different. So your camera should have the same protocol as the brand you bought your Mezt for.
The good news is. I use both Nikon and Metz Speed lights. My Metz is from my Canon days, but when using it remote, I can use it with my Nikon, on the flash trigger that my small Speed light on the camera fires. So the wireless (light) remote, is standard for most brands.
1/17/2014 9:27:25 PM •
Fuji Cameras
•
Answered
on Jan 17, 2014
Silent mode on fugifilm x-M1 digital camera not working
For silent mode the manual says o page 84: In the Setup Menu Options: Select ON to disable the speaker, flash, and illuminator in situations in which camera sounds or lights may be unwelcome (note that silent mode can not be enabled or disabled during movie playback). Silent mode can also be turned on or off using the DISP/BACK button as described on page 4.
Perhaps you try this one?
1/8/2014 7:37:31 PM •
Fuji Cameras
•
Answered
on Jan 08, 2014
Camera will not come on
If you have a USB cable to tether it to a computer try that. It should provide power if the battery is dead and will enable you to figure out if the camera has a problem or the battery has a problem.
1/6/2014 7:33:54 AM •
Fuji Cameras
•
Answered
on Jan 06, 2014
Camera on Fuji S 4250 will not come on only in replay mode
Did you use the on/off switch? did you toggle with the display button (arrow to the right) and are you sure the battery is charged?
Last but not least, are you sure the lens is not blocked? careful feel if the lens can move a little and there is nothing in or around the lens barrel, that obstructs free movement.
1/5/2014 4:25:44 PM •
Fuji Cameras
•
Answered
on Jan 05, 2014
Fujifilm ax280 won't turn on
You think the lens got stuck. Don't use force, but try if the lens will move a little when pulled or pushed. Take care, there are gears on the lens and if the motor does not work, you will definitely damage some gears. You need power in the camera, to let the motor retract the lens.
If nothing works, you should go to your dealer, or contact Fuji.
I sometimes read you could try slamming your hand where the camera sits in, while switched on, but if you don't know enough about how everything works in your camera, don't do this. Because you end up with a camera that can't be repaired.
11/21/2013 10:37:49 PM •
Fuji Cameras
•
Answered
on Nov 21, 2013
I need software driver finepix XP10HN Can't find
Do you really need the Fujifilm software?The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa (
http://picasa.google.com ).
9/27/2013 1:52:32 PM •
Fuji Cameras
•
Answered
on Sep 27, 2013
My finepixviewer is unsupported by mac os x 10.8. where can i get or download the software that will be supported
They still don't make an intel mac (mac os10.7 on) version of finepix viewer. I am still trying to find a workable workaround! Don't have a usb card reader, maybe I should get one. Graphic converter for mac (free?) will download from our cameras, but with mixed results.Graphic converter views folders well, it's the best mac app in the world, but the download for certain finepix models at least, is not up to scratch. I still need a proper solution.
9/21/2013 11:49:23 AM •
Fuji Cameras
•
Answered
on Sep 21, 2013
Not finding what you are looking for?