20 Most Recent
Belkin (F5D72304F5D7000) Router - Page 2 Questions & Answers
Don't remember password
In the case of a lost password you need to push the reset button on the back of the router. Hold it down for 30 seconds and then unplug the router from power. Plug it back in to the power.
Setup steps:
- Connect the computer to one of the four LAN ports on the router.
- Open a web browser on the computer.
- In the address bar of the web browser, type http://192.168.2.1
- Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
- Click on System Settings under Utilities on the left-hand side of the opened page.
- You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
.
-
Click "Apply Changes". Your new password is now active.
Note: Do not forget the new password and keep
it somewhere safe. If you forget your password, you'll be unable to
access your router's settings. If you forget or lose your password,
you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.
11/4/2010 10:27:02 AM •
Belkin...
•
Answered
on Nov 04, 2010
My Model number is F7D2301 and Its says I'm
Uninstall the belkin Router Monitor Software
its very important to maintain a stable connection
WIRELESS SECURITY ISSUES
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works
10/5/2010 9:06:35 PM •
Belkin...
•
Answered
on Oct 05, 2010
Cannot conect to router wirelessly
WIRELESS SECURITY ISSUES
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works
9/28/2010 9:21:32 PM •
Belkin...
•
Answered
on Sep 28, 2010
I had someone put a
Are you looking for the wireless network key or password ?
Is there any computer online using the router.
If not then you will need to connect the computer to the router.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
You will find the wireless network key or password on the set up page of the router.
Click Here for step by step instructions
6/30/2010 4:00:02 AM •
Belkin...
•
Answered
on Jun 30, 2010
Cannot connect to internet
call ur isp ...ask for
1. ip address
2.subnet mask
3.default gateway
4.dns
or
1.ppoe - username and password
============
connect ur belkin to the computer
1. start - run - cmd - enter
u get a command prompt screen
2. type ipconfig
u will get the default gateway
close that black screen
3.open the internet explorer
4. type the default gate way in the address bar
5. it will ask for the user name and psw for belkin
6. check ur manual for default user id and the psw
7. u can see the main page of belkin
8. enter the first set of settings or the second set
save
==============i hope this will help u
4/30/2010 4:33:36 AM •
Belkin...
•
Answered
on Apr 30, 2010
My belkins wireless light wont
* try connecting ur belkin router to different power socket
* try with different power adapter
* or else press the reset key for more than 1 min
while holding the reset unplug the router power cable and plug it back again 3 times.--- while holding the reset u shouldnt release the reset while u unplug and replug.
the interval between each unplug and replug should be 15 seconds.
* then release the reset then unplug the power cable and plug it back
* it has to work or else replace it with the belkin tech support
4/30/2010 4:25:40 AM •
Belkin...
•
Answered
on Apr 30, 2010
Belkins router is giving me nothing but problems.
* there are 2 different types of reset one is hard reset and the other soft one
* the hard reset u need a paper clip press the reset hole for more than one minute -- u need to feel the click when u press the reset hole --- if not then the reset button is not functioning
* the soft reset is u need to login inside router using 192.168.2.1 in the address bar of ur browser and click on restore factory settings which is under UTILITIES on the left side
* if still doesnt work u need to update the firmware in belkin.com/support
4/30/2010 4:17:59 AM •
Belkin...
•
Answered
on Apr 30, 2010
Linksys router problems
you are getting the message limited or no connectivity , that means your computer is not getting IP address from the router. First check the physical connections to the router . Make sure that your computer is connected to the router on port 1, 2, 3, 4 and
NOT on Internet port.
If the connections are correct and you still get the same error then reset the router for 30 seconds. Unplug the power to the router and plug it back in. wait for 1 minute and reconfigure the router.
First make sure that the computer is able to go on line directly through the modem.
Click here for more information about the router and networks
2/24/2010 4:51:46 AM •
Belkin...
•
Answered
on Feb 24, 2010
Will not connect during setup
Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions
2/11/2010 12:36:37 PM •
Belkin...
•
Answered
on Feb 11, 2010
I am trying to get
1. connected the camera in the ethernet port of the belkin router
2. know the ip address of the ip camera
3. access the camera from the computer by using typing in the ip address of the camera for example 192.168.2.x
2/8/2010 10:32:35 AM •
Belkin...
•
Answered
on Feb 08, 2010
POOR SIGNAL WITH BELKIN N+ ROUTER
1. open internet explorer type 192.168.2.1 in the address bar
2. at the left column under utilities click on the restore factory default
3. it will ask for login password leave it blank click submit
4. click on the restore default and click ok
5.let the restore complete
6.enable security by clicking on the security on the left hand side
7. remember to use 64bitWEP because some of the windows xp doesnt work with wpa-psk security encryption.
8. change the channel to 1, turn off the qos configuration in the CHANNEL AND SSID PAGE
9.then if its still not working download the firmware form the belkin.com/support
10. most of the belkin products gets resolved if u download the firmware for the routers
2/8/2010 10:20:14 AM •
Belkin...
•
Answered
on Feb 08, 2010
Want to splice my mobil phone to get emails via
1.open the internet explorer
2. type 192.168.2.1
3. on the left hand side click security under wireless
4.it will ask for a login password leave it blank click submit
5.then u can see the security mode with the passphrase or key
6.if the passphrase (or) password(psk) is in dotted one then uncheck the obscure psk so tht u can see the password
2/8/2010 10:02:12 AM •
Belkin...
•
Answered
on Feb 08, 2010
My boyfriend had a female visitor that messed with
For every router there is RESET button. by pressing that the router will restore it to factory defaults. So you can be able to set your own settings.
Hope this will be useful
Thanks & regards
Nandu :)
12/29/2009 6:42:35 AM •
Belkin...
•
Answered
on Dec 29, 2009
My Belkin router froze last week. Problem solved
the laptop is not able to connect to the wireless network.
Is there any other wireless computer connected to the network and going online.
If yes then the router must be working.
Check the settings on the laptop.
Click Here for more info
11/16/2009 7:56:29 AM •
Belkin...
•
Answered
on Nov 16, 2009
I need to turn off NAT translation on Belkin
NAT translation makes it possible for more than one computer to "share" your Internet connection.
So, if you only have one computer, and that computer is not using a "wireless" connection, you can physically remove the router from your network., i.e., connect the DSL-modem or cable-modem directly to the Ethernet port on your computer.
Note that both Mac OS X and Windows XP/Vista/7 have a "built-in" firewall, which is enabled, and which functions just as well as the firewall "inside" the router. So, removing the router from your network does not make you any less "secure".
11/9/2009 11:26:33 PM •
Belkin...
•
Answered
on Nov 09, 2009
I can not find my password. Is there a number I
The default password is blank (there is no password). If you created one later in the router setup then you will have to reset your router to its default factory settings. You can do this by pressing and releasing the reset button at the back of the router. Once the lights are solid again you can log into the router with no password.
11/2/2009 2:46:39 PM •
Belkin...
•
Answered
on Nov 02, 2009
Not finding what you are looking for?