20 Most Recent Lexmark P4350 All-In-One InkJet Printer - Page 7 Questions & Answers

The 1102 error message is caused by a communication failure between one of the printheads (cartridges) and the All-In-One (AIO). Please refer to this article to determine and resolve the issue: 1102 Error Message on the Lexmark P4300 Series All-In-One.

When you refill your cartridge, the cartridge will no longer be able to register its ink level.

I had this same problem, I found a long skinny thin plastic strip had fallen off & caused the problem for me. The plastic strip has slits at each side to attach to the inside back of printer, on the left side is a down ward facing arrow, the plastic strip feeds through the back middle of the cartridge carrier and then the slits are to be inserted to the metal tab like pieces on the back sides inside the printer on the right side (facing printer) it will look like a small rectangular hole with a longer metal tab like piece sticking out & on the left is a smaller squared like hole with a flat smaller metal like tab which will line up if the plastic strip is feed through the back of the cartridge carrier properly. This should allow the cartridge carrier to glide properly & work as it should, with no more banging! Sorry my tech. terminology isn't good, I am not Knowelegable with this sort of thing, just sharing my experience :) HTH!

http://driverscollection.com/?file_cid=392169557345b7fa62f8113e25d


if you see that is helpful please don't forget to vote me

best regards

You can download and install the Lexmark P4350 driver by visiting the Lexmark website at http://bit.ly/bETkq1. Select your operating system, download and then execute the file. However, if your main problem is the printer not recognizing your cartridges, make sure you are using the correct cartridges for your model (Mono: 32, 34 and Color: 33, 35). You could try to re-seat your cartridges by removing it from your printer. Unplug and replug your printer into the power source to reset it. When the printer turns on, reinsert the cartridges properly. Hope this helps.

This article in the Lexmark website on How to Troubleshoot a Paper Jam or Misfeed on the Lexmark P4350/P4330 Photo All-In-One will help you fix the paper jam problem. However, if problem continues, there could be some sort of foreign objects that fell into the paper feed system. Grab a flashlight and look into the feeder for any foreign objects that's in the paper path or, if you are capable and willing, carefully lift your printer upside down so the foreign object will freely roll out from the feeder.

Re install the software and new release driver for these printers, I bought one in Aug last year.

Step Action Image 1 Ensure the All-In-One printer is powered on. No image. 2
Lift the scanner unit or access door (per right-hand image).
The cartridge holder will move to the center of the Inkjet or All-In-One.
3 Press down on the cartridge carrier latch to raise the carrier lid. 4 Remove the used cartridge. NOTE: If you are removing both cartridges, repeat the preceding two steps for the second cartridge. No image. 5
Remove the protective tape from the back and bottom of the new cartridge(s).
WARNING! Do not touch the gold contact area on the back or the metal nozzles on the bottom of the cartridges. 6a Insert the new cartridges into their respective carriers. The image at right illustrates inserting the color cartridge. 6b The image at right illustrates inserting the black cartridge. 7 Close the carrier lids so that they remain closed. See image above in Step 3. No image. 8 Close the access door or scanner unit, taking care to keep your hands out from underneath the scanner unit as it is being closed. No image. 9 On some All-In-One units, the control panel display will prompt you to load paper and print an alignment page. NOTE: The scanner unit must be closed before you can start a new scan, print, copy, or fax job. No image.

Hello michaelso85! You can download the drivers on this website. Just choose what operating system yyou are using. Hope this helps :)

try out the website,, it has the drivers and all the other guides,,,,
download and install...
http://support.lexmark.com/index?locale=en&segment=DOWNLOAD&startover=y&userlocale=EN_UK&question=Lexmark+P4350+All-In-One+InkJet+Printer&productCode=LEXMARK_P4350&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_P4350&searchid=1268337423489#1

Cartridge Error (1102, 1203, 1204, or 120F)

1. Remove the print cartridges, and close the cartridge carrier lids.
   
2. Disconnect the power cord from the electrical outlet.
   
3. Reconnect the power cord to the electrical outlet.
   
4. If the button is not lit, press .
   
5. Reinsert the print cartridges.
   

If the error does not reappear, the problem has been corrected.
If the problem reappears, one of the cartridges is not working properly. Continue with the following procedure to determine which cartridge is not working properly.

1. Remove the print cartridges, and close the cartridge carrier lids.
   
2. Disconnect the power cord from the electrical outlet.
   
3. Reconnect the power cord to the electrical outlet.
   
4. If the button is not lit, press .
   
5. Reinsert the black (or photo) print cartridge.
   
6. If the error:
   
   • Reappears, replace the black (or photo) print cartridge with a new one.
     
   • Does not reappear, reinsert the color print cartridge.
     
7. If the error reappears, replace the color print cartridge with a new one
   

Please rate & vote,If you like solution...

Thanks

You will want to use the Lexmark #32 ink cartridge. To install it, watch this video:.

Hello margueritena
You can download the driver from here :
http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_P4350&focusedTab=DOWNLOADS#1
Make sure to select the correct OS before downloading . Under Windows 7 , try in compatibility mode with Vista .
Best regards ,
fanaudi

Hi there maximum time we found it is a the head problem. The print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these.
Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug the printer & Manually slide the carriage. Now Remove the ink cartridges from the print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now If that does not work then follow the next step.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

Try to unplug your printer from your computer. Unplug and replug your printer into the power source to reset itself. When your printer turns on completely, reconnect to your computer. Try to print again. If problem continues, you may refer to these articles in the Lexmark website:
- Communication Not Available' Error Message and Print Job Stalls in Print Queue - No Communications Error When Trying to Print or Scan
I hope these help. Thanks.

You may need to uninstall your existing Lexmark driver from your computer. Follow the steps in this article on How to Uninstall Lexmark Printers. Reboot your computer when prompted. To reinstall, click this link Lexmark P4350 Drivers to download the driver from the Lexmark website. Hope this helps. Thanks.

If scanning was working perfectly before, it could be a minor communication issue. Unplug your printer from your computer. Unplug and replug your printer into the power source to reset itself. When your printer turns on completely, reconnect it to your computer. Then try scanning again.

Black ink for Lexmark P4350 are:
- #32 standard yield cartridge - #34 high yield cartridge
Thanks.

Have you tried a print head cleaning from the printer software or menu? It sounds like there is a printhead needing cleaned with the horizontal lines.

perhaps it's best to go to lexmark website and get the proper driver for the product.
Best regards
Ck