When I go to print something with multiple sheets it only prints the first sheet and that is all.
You may want to verify that your in your printer menu it is set up to print the entire document not just the screen view document. If it is on the screen view it will only print what you can currently see, not the additional pages.
Posted on Aug 24, 2007
I have a Lexmark p4350 printer and when downloaded on my computer the software didn't download the Imaging Studio so I can review my images and fax documents.
I had same problem on windows vista.
Went to c:\drivers\printer\4300\applications\setup.exe
and Yippee it worked!
Posted on Jan 05, 2009
i have put the cd in and it has gone through the stages, however the printer will not scan, and there is no all in one centre to send photos etc.on the drop down list in start. The printer to print from computer ok, but can not scan although it is on computer as lexmark, but lemark printer says software not fully uploaded. i can not buy pass this or get on from here. is this printer etc not compatabile, or am i missing something? Tried the disc over, and uninstalled it and re installed it but to no use, please help, before i take it back.
Lexmark all in one solution software you used in XP doesn't work with Vista.
But you can still scan and copy by using Windows Photo Gallery.
1. Click on files tab at the top in Window Photo Gallery.
2. Click on import from camera or scanner.
3. Highlight your scanner icon (ie lexmark 4300) then click import.
4. "New scan" window will popup, now you can preview or scan using this basic looking Vista tool.
Hope it helps.
I miss my Lexmark all in one solution scanning software too.
Posted on Feb 26, 2008
My lexmark X5400 printer just starting printing one page of a multiple page document. I have not tried to print from micro soft word, but when trying to print from the internet the printer will not print past page one.
I have the x5470 and am experiencing the same problem.
ok now it's got a doc stuck in the spool and even though you delete it, it won't go away!!! can't print at all now! ****!
hi..
You may try to change the spool data format:
1. Click on "Start," "Control Panel," "Printers and Other Hardware" and "Printers and Faxes."
("Start," "Control Panel," "Hardware and Sound" and "Printers" for Vista...)
2. Then, right click on the Lexmark printer icon and left click "Properties."
3. Either on the "Advanced" tab or the "General" tab for some models, there is a "Print Processor" button, left click it.
4. This is the spool format setting. Under "Print processor" it should be set to "Lexmark *** series print processor." Next, under "Default datatype," select "NT EMF 1.008."
5. Click "OK" and exit back out to your desktop.
6. Try printing again.
Posted on Apr 24, 2009
How do I reset the ink level on my lexmark all in one printer type 4423
if you are useing a refilled cartridge , ink cartridge has a chip built in that must be reset, if you look on line you can purchase a reseter. if you use a new ink cartridge it will show a full ink level
Posted on Jan 15, 2008
I get an error message to clear carrier jam - but it isn't jammed. When I try to print something the carrier zooms accross from the right, smashes into the left hand side hard enough to move the wole printer by about a centimetre - then it immediately zooms across to the right again crashing into the side with a loud bang and at great force. When I open the cover the cartiridge carrier does not come out into the middle - I have to pull it out to check the cartridges. I can't print anything. Ive cleaned all the contacts etc. what can I do the printer is only six months old.
I had this same problem, I found a long skinny thin plastic strip had fallen off & caused the problem for me. The plastic strip has slits at each side to attach to the inside back of printer, on the left side is a down ward facing arrow, the plastic strip feeds through the back middle of the cartridge carrier and then the slits are to be inserted to the metal tab like pieces on the back sides inside the printer on the right side (facing printer) it will look like a small rectangular hole with a longer metal tab like piece sticking out & on the left is a smaller squared like hole with a flat smaller metal like tab which will line up if the plastic strip is feed through the back of the cartridge carrier properly. This should allow the cartridge carrier to glide properly & work as it should, with no more banging! Sorry my tech. terminology isn't good, I am not Knowelegable with this sort of thing, just sharing my experience :) HTH!
Posted on Nov 14, 2008
After refilling the Lexmark X-4550 all-in-one cartridge, the display show "OUT OF ORIGINAL LEXMARK INK" message. How can i reset or avoid this?
my mail: [email protected]
Thank you!
Iuliu - Romania
"Out of Original Lexmark Ink" nag:
I got this on my Z1300. There is a "learn more" button that allows the nag to be turned off. Worked for me, at least for tonight.
Boyceg1
Posted on Jun 19, 2008
i dont have my cd for my lexmark 7600 printer what can i do for it to work with my computer
You can download a driver at
http://www.lexmark.com
Use their "driver finder" link under "Drivers & Downloads".
Posted on Jul 07, 2009
I Dont know where my Instruction manual is.
How do I scan photos onto the computer?
okay, I put the photo in my lexmark p4350 (4300 series) scanner...i open microsoft picture it ( I tried other programs too and have this same problem) and click file get picture from scanner- and then it scans and i click scan on the bottom and it will show the preview but it won't let me save it or anything...and i tried clicking scan on the scanner it makes the noise and says it scanner ... and without clicking scan on the bottom of microsoft picture it ..it does nothing....no preview or anything....so how do i get the photo from the scanner to the computer or to a photo programs such as microsoft picture it, or print shop or any other program...please help....
turn the printer on, place the picture on the glass, on the printer under mode press the big silver button until the scan light comes on then press select, you should hear the picture scanning, then on the computer, go under my pictures and you should see that picture.
Posted on Apr 18, 2009
just upgraded to windows 8 and now my Lexmark p4350 printer will not load up.
sure it works, but you need proper driver. it can be downloaded from this tool: Driver Update Software for XP Vista 7 8. Have a nice day. Thomas
Posted on Jan 06, 2015
732 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions