Top 20
Motorola Mobility HS850 Consumer Headset Questions & Answers
I need paring instructions for my HS850 to my Iphone.Both from the HS850 and the Iphone side.
To pair the bluetooth headset with your iPhone. Switch on the headset. Then in the iPhone goto settings then bluetooth you can see the iPhone is searching for devices. If it sees your HS850, just click on it and when asked to enter a pin, give in 0000.
Once the iPhone knows your device, I should find it every time both are switched on. (Bluetooth must be switched on on the iPhone)
7/12/2014 12:08:20 AM •
Motorola...
•
102 views • 0 helpful votes
Motorola hs850 bluetooth headset won't pair with g five mobile
How to place a Motorola HS 850 bluetooth headset into paring mode:
- Close the boom to turn the unit off.
- Hold down the call button until the blue light comes on.
- While holding down the call button, swing the boom open.
- (Now you can let go of the call button.)
The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.
5/14/2012 4:47:50 AM •
Motorola...
•
222 views • 0 helpful votes
My motorola n136 will not pair to my ps3
Hold down the answer call button on the bluetooth headset until the
light is solid (not flashing). When the PS3 detects your headset, it'll
ask for a pass. The pass should be "0000" (four zeros).Hope this helps.
10/20/2011 3:10:14 AM •
Motorola...
•
559 views • 1 helpful votes
I can't get my HS850 in pairing mode
Hi Jeanie:How to place a Motorola HS 850 bluetooth headset into paring mode: Close the boom to turn the unit off. Hold down the call button until the blue light comes on. While holding down the call button, swing the boom open. (Now you can let go of the call button.)The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.Hope helps. Your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.Thank you for using Fixya, and have a nice day.
10/28/2011 9:48:03 PM •
Motorola...
•
72 views • 0 helpful votes
I have tried everything .
Firstly, make sure you have enabled Bluetooth on your phone or whatever device your using the headset with. The default setting off, so go into your phones set menu and enabled Bluetooth.
You'll then need to 'pair' the headset and phone.
1. Ensure the headset is turned off (indicator light not blinking).
2. Press and hold the Call E button for 4 or 5 seconds. The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit.
If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2. Hold the Call E button for 4 or 5 seconds.
3. Enable Bluetooth on your phone and get to 'search for devices' it should find the headset.
4. Select Motorola HS850
Select OK or Yes to pair your headset with your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with your phone, the indicator light changes from
steadily lit to flashing.
Hope this helps. Oh and make sure your phone actually supports the headset!
6/13/2011 10:56:16 PM •
Motorola...
•
108 views • 0 helpful votes
Need instructions for connecting ear piece to
Hi,to complete the look of a tech-savvy, iPhone-using individual, you must have a Bluetooth headset to accompany it. You can pair any Bluetooth headset with an iPhone. The Motorola HS850 is no exception to this. Both Motorola and Apple's Bluetooth set-up process is fast, so you'll be talking with people through your new Bluetooth on your iPhone in a matter of minutes.
Instructions
Charge the Motorola HS850 headset fully before attempting to pair. Usually, it takes two to three hours to charge the headset.
Press and hold the "Call" button (has a phone icon on it) on the headset for six to 10 seconds. The outside LED light will turn on indicating that the phone is in pairing mode.
Choose "Settings" on the iPhone homescreen.
Select "General," then "Bluetooth."
Select to turn Bluetooth on.
Wait for the phone to search for in-range devices.
Select theMotorola HS850 from the list of devices.
Enter the headset passkey to complete the pairing. By default this is "0000."
Have a nice day..
2/23/2011 3:42:49 PM •
Motorola...
•
379 views • 1 helpful votes
How to pair a motorola hs8501226b to an i phone
Turn on BT on the iPhone. From the home screen: Settings > General > Bluetooth. Setup the headset to be discoverable (push and hold the button on the HS700 until the ring turns blue. Extend the boom mic. I believe you do the same on the HS850.) iPhone finds the headset. Enter the code for the headset. Mine was 0000. I believe that's universal for Motorola BT headsets
Hope this was helpful
Positive Feedback ALWAYS Appreciated :)
3/4/2011 8:29:20 AM •
Motorola...
•
72 views • 0 helpful votes
I don't remember the passkey
The passkey is 0000 and cannot be changed, did you follow the correct procedure ?
To place a Motorola HS 850 bluetooth headset into paring mode:
- Close the boom to turn the unit off.
- Hold down the call button until the blue light comes on.
- While holding down the call button, swing the boom open.
- (Now you can let go of the call button.)
The headset is now in pairing mode, and you can search for it using your phone.
When it asks for a PIN, use 0000.
12/29/2010 8:00:59 PM •
Motorola...
•
263 views • 1 helpful votes
How to set up motorola headset HS 850? Bluetooth
Here is the PDF version of the manual...
http://www.motorola.com/support/v/index.jsp?vgnextoid=0dc86d4a3590e110VgnVCM1000008406b00aRCRD&vgnextchannel=248ae66506e9d110VgnVCM1000008406b00aRCRD
3/8/2010 1:32:38 AM •
Motorola...
•
963 views • 2 helpful votes
How do i reset my passkey for the motorola hs850
Hi,
The Default Code with HS850 is 0000.
If that would not work, let me know and we would further troubleshoot.
Let me know,once done.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
4/8/2010 4:24:32 PM •
Motorola...
•
287 views • 0 helpful votes
The pairing light on my HS850 soes not come on?
You have to start with the boom closed and press the large button with the phone symbol until the blue light comes on, then open the boom before the light goes out and you should be able to pair it with your phone.
2/26/2010 12:23:53 AM •
Motorola...
•
455 views • 4 helpful votes
Not finding what you are looking for?