20 Most Recent
Westinghouse LD-4055 40 Class LED HDTV -1080p, 1920 x 1080, 16:9, 4000 - Page 3 Questions & Answers
My westinghouse tv and element tv
Your TV might of had died on you guys and has stopped working too. Or it could be a power supply problems. It would be more cheaper to purchase another TV than to try and repair the current TV that is no longer working.
Westinghouse monitor keeps turning off.
You did not post the model number to see what parts can be purchased whole. However, unless you can solder and have basic skills in disassembly of electronics, it would not be possible to make a component level repair on the unit. There is either bad capacitors that are allowing too much ripple current into the boad or the back lights are drawing too much power
I'll relist the question.
Try removing the batteries in your remote and switch it on manually. If not OK. Try unplugging it for 1 day and connect it again. That usually resets its electronics. If it fails then the power supply electronics needs repair.
I need a channel access code for a westinghouse model EW46T4LZ
Applicable codes would be in a compatible remote control.
Directions to get remote codes to work on Westinghouse TVs:- TV.
- Press and hold MUTE & SELECT for two blinks.
- Enter 9 9 1, wait two blinks.
- Enter 1.
- Press and release VOL UP.
- Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes.
- Press select to lock in code.
Set up my Westinghouse tv on antena
It tells you exactly what you have to do, Connect it and Phone the number. Tell them the serial number of the set and they will send you a code.
Not finding what you are looking for?