Top 20 Dell PowerEdge 6650 Server Questions & Answers

Hello here is a link to the homepage:http://search.dell.com/results.aspx?cat=sup&s=gen&c=us&l=en&cs=&k=replace+CMOS+batteryAnd here is the download site for drivers:http://www.dell.com/support/drivers/us/en/19/Product/poweredge-xeo6650Try also to upgrade the bios. just make sure its the right model.You maybe have to set up the boot settings when you replace the cmos battery or renew the bios.Good luck

Sounds like a bad motherboard have you check it for blown caps?

Hello,

Not sure what the beeping sound is but if it is an error code beep, go into your BIOS at startup and disable audiable alarm for boot errors.

Good Luck
C2S

tengo um problema con mi servider me pude insertar 2 discos pero como utiliso la relif para este servidor

Have you checked boot device options....from BIOS
Use F9 during boot to goto ROM-BIOS and change Boot device option to CDROM/DVDROM.
Insert Boot media or DVD-Win2003, to DVD-ROM device..
reboot Server, try now
If still issue.. Check to boot Server using some other media..
if other cd media works, then it could be DVD-Win2003 faulty, otherwise download firmware for CD/DVDROM and upgrade it and check if DVDROM works, otherwise you have to contact Dell Support..

Write down service tag and express service code from server label.
Call Dell. PowerEdge servers come with lifetime phone support.
I think the number is: (800) 945-3355

If this helps, please vote for my solution.

Please be more specific. You haven't actually asked a question. What are you trying to do? What happens that you aren't expecting?

Computer not recognizing the hard drive. Look in BIOS to see if hard drive is listed. Reload system disc/CD.

driver here hp v165w driver

It could be a couple of things 1. the computer Cpu fan is not working or is clogged inspect it and clean or replace.2 The power supply could be bad

Namrata_stha, The I912 error is referring to the System Event Log is full of events and because of this is unable to log anymore. You must clear the log in order for the Server Management controller to log any more events. Now depending on the OS installed there are different ways to clear it. If Windows Server 2k8 you would use this command - wevtutil el ' foreach { wevtutil cl $_ } Where with Server 2003 you can go tot he Event viewer and clear it. Let me know if this helps.

what is your server model? in most cases you can use the operating disc to format the server drives

www.hp.com/support

Go to start menu. click on 'control panel'. Select 'system and security". Then select 'system'. This should give you the info.

You will have to get into the controlled setup in order to find out what the problem is, or you can simply hit ctrl-D and do the Dell disk diagnostics which will take an hour or more, but will give you an idea of where to start. Logically, if it won't boot, then your RAID is probably broken. it can sometimes be repaired through either the RAID or controller setup menu, which you can see during boot. go here, for the manuals and documentation on how to do that: http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-t105/manuals

Is it in a 1, 3, 2 beep pattern (beep....beep, beep, beep........beep, beep)? If so, the memory is either not seated well or may be bad. Try reseating your memory. If it continues, try with one stick at a time just to see if it will boot up with a display.Thanks,--Brian

What question do you have about your battery? Do you need to order one or are you experiencing low battery life?

Kindly start windows in safe mode by pressing F8 key while powering up, Goto device manager and uninstall any new installed drivers or device. Regards,Kaushik Patel

You can download the service manual from Dell`s website or either check some youtube tutorials if available.

Please replace CMOS battery and then will not be losing time.Regards,Kaushik Patel