20 Most Recent Dell Dimension 2400 PC Desktop - Page 8 Questions & Answers

What kind of monitor?

your window is corrupted... installl new windows

please vote 4 me....im sure this is the solution of your problem

http://pcsupport.about.com/od/findbyerrormessage/a/iertutil-dll-not-found-missing-error.htmRead this .CAREFULY.

http://support.dell.com/support/edocs/systems/dim2400/en/sm_en/index.htm

try to use the monitor menu button and do a factory reset, it should take care. try to unplug the monitor cable from the tower you will get monitor self test if its good then the problem is not with the monitor it should be the problem with the tower.

Perhaps the drive is bad?

sometimes a key/button on keyboard or mouse gets stuck (pressed), you restore it to original position ( and restart) If it is not solved then try re-installing the drivers I had the same problem.

YesI don't know anything further to tell you,......but Yes.Hmmm, how about this?You press the Power On Button.This plastic assembly then presses against the Power On switch, located inside it.The Power On switch is a Momentary Contact Switch.It only closes for about 1 second.Closing the Power On switch activates a Soft Power On circuit.The Soft Power On circuit uses the 5 Volt Standby power.[The Power Supply always has 5 Volts present, when it is plugged into power. This is the 5 Volt Standby Power ]Activating the Soft Power On circuit, 'excites' the Power Supply, and turns it on. (Sounds like a steamy novel)The first chipset to receive power is the BIOS chipset.The Basic Input/Output System program (BIOS) is initialized.BIOS looks to see what DEVICES are connected, does a Ram Memory count, turns the Processor on; and hands the computer over to the Operating System. (In this case a version of Windows)-> BIOS LOOKS TO SEE WHAT DEVICES ARE CONNECTEDThis means power is sent to the Keyboard to check it,then power is sent to the Mouse to check it.Also power is sent to all of the connected devices. [ BIOS:"Okay, what we got here?.........Hmmm, the Keyboard.Yep, sent power to it, and it works.......Okay, go on........What's this? Oh, yeah. A Mouse. Power to it reveals it works.Time to go onto to any other devices, that might be connected.I gotta' get this wrapped up. Supposed to pick up eggs, and bread before I get home; or the Ol' lady's gonna' be mad." ]For additional questions please post in a Comment.Regards,joecoolvette[Chip and Chipset are slang terms for I.C.Integrated Circuit,http://en.wikipedia.org/wiki/Integrated_Circuithttp://en.wikipedia.org/wiki/BIOShttp://computer.howstuffworks.com/

I thing you have the wrong category.

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer Windows Advanced Options Menu Please select an option: Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Enable Boot Logging Enable VGA mode Last Known Good Configuration (your most recent settings that worked) Directory Services Restore Mode (Windows domain controllers only) Debugging Mode Start Windows Normally Reboot Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice Select safe mode with networking to download http://ct.download.com/clicks?t=1169844150-ce770fd4fbc57664a08aea1a8f03b80d-bf&brand=DOWNLOAD&s=5 Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. it might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions this will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated

you can use hidemyass and a proxyprograms

if you see lights get on Keyboard.. your motherboard is fine.. else it is your Keyboard or Super I/o Chip that is not working..

just looked. in main search bar enter e:/ is not a valid win32 application i'm not looking to solve any problems on my pc but tool read my pc running xp.its a windows program scroll down download and run should fix it for ya!

There are many issue that can be related with your problem. Issues are:

• a faulty ram
• a faulty motherbroad
• low input voltage supply to the cpu
• a faulty processor

• a faulty monitor

So, what i recommend for you is to check the following listed. It would be a better choice to take it to the servicing center if problem still there.Thank you for asking your question on fixya.com

Step 1: The Ubuntu Linux operating system is available either with or without a desktop environment. The version with the desktop environment is meant for personal use and includes word processing, email and graphic editing software. The version without the desktop environment is called "Ubuntu Server." The server version does not come with any graphical software or productivity software. There are three different desktop environments available for the Ubuntu operating system. The default is the Gnome desktop. The other two are the KDE and the XFCE desktop environments. Log into the server. Type the command "sudo apt-get update" to update the list of software packages available. Type the command "sudo apt-get install ubuntu-desktop" to install the Gnome desktop. Type the command "sudo apt-get install xubuntu-desktop" to install the XFCE desktop. Type the command "sudo apt-get install kubuntu-desktop" to install the KDE desktop. Type the command "sudo reboot" to reboot the server. Ubuntu Linux Tutorials,Howtos,Tips & News http://www.ubuntugeek.com/install-gui-in-ubuntu-server.html

That's because the diags were located on your old hard drive on a different partition of the hard drive.

the reason for an admin password is so not everyone can down load, or change program files important to the computer running correctly. you can set up different user accounts with varying degrees of access, each with their own password if you wish. from the start menue, go to contol panel/ user accounts

locate the program right click on it see what options are available this will differ depending on your operating system there might be run or run as administrator

operating system or hardware diagnosics?

Bypass the UPS by plugging the computer on a known good outlet. If it still doesn't power-up, replace the power supply in the computer.