20 Most Recent Bosch GTA500 Folding Stand for 10-in Portable Jobsite Table Saw GTS1031 - Page 4 Questions & Answers

take it in to an appliance repair shop for an electrical check could be the power cord, switch or motor

the batteries are dead because of no charge for a long time chears

One of the four slide contacts on the electric field can be worn or broken .!! measured switch and electric assembly for shure. suc6

Buy a good variac for shure is a better way to do it . for a 15 a 4.4 hp motor .

Buy a second hand step down trafo 230v to 120v to made it a sheaper project , its not worth for this kind of handpowertools to customize it. On marketing technical reasons, there are no equivalent components for this model cs20 the armature is look a like a Makita armature some type of bosch tools are comparable with parts in several variations. but little differences on measurements.

for an electric motor to run backwards it requires a current direction change in the fields as that is not possible unless there is a direction change switch as in a reversible drill there is a major fault in the motor windings take it in to an appliance repair shop for a proper diagnosis and quote

There is only an allenkey necessary( its most inside the machine tucked away ) partnr 37 until part 36 become some loose very simple principle.

Hi just wondering what the screw looks like as I have an old one of these that the screw went missing out of years ago. I'd like to replace it but need to know length and diameter of the screw if you could please?

There are 2 diagrams on this page, they may help you figure it out. Bosch 4000 0601476139 Table Saw Parts

http://preview.u-manual.com/preview-manual-for-free-198851/tools-bosch-pfz-500/page-1.html