20 Most Recent
Canon imageRUNNER 3300 All-In-One Laser Printer - Page 2 Questions & Answers
RemoteUI Contents is Not Found
Remote UI probably has not been installed on copier. Get a technician to come out and use SST to load RUI onto your copier. They should upgrade firmware to latest version at same time.
Don't forget you can also pull scan over the network using Canon Network ScanGear Tool in case you would like to scan.
10/16/2018 1:50:29 PM •
Canon...
•
Answered
on Oct 16, 2018
Canon IR2545 showing the error code E000000
Fixing temperature abnormal rise
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power. 2.Check connection of the Connectors (Thermistor Connector and AC Connector). 3.Replace the Fixing Main Thermistor (Film Unit). 4.Replace the Fixing Assembly. 5.Replace the DC Controller PCB (PCB4)..
9/24/2018 6:48:57 PM •
Canon...
•
Answered
on Sep 24, 2018
My IR 3300 display E000051-0000 please help me...
Hello,
E051
0000 At start-up, home position is not detected when the horizontal registration
assembly is moved 100 mm in the direction of home position.
Main cause The horizontal home position sensor is faulty. The horizontal registration
motor is faulty. The DC controller PCB is faulty.
Action
1. Connector
Are the connectors of the horizontal registration home position sensor and
the horizontal registration motor connected?
a. DC controller PCB (J304) relay connector horizontal registration
home position sensor
b. DC controller PCB (J304) relay connector horizontal registration
motor
NO: Connect the connectors.
2. Sensor lever (damage and interference), Sensor
Is abnormal noise heard from the horizontal registration assembly in keeping
with the motor rotation?
YES: a. The horizontal registration assembly is out of place because of
damage to the sensor lever. Replace the sensor lever.
b. The horizontal registration assembly malfunctions because of the
presence of foreign matter. Remove the foreign matter.
c. The sensor is faulty and cannot detect home position. Replace the
sensor.
3. Horizontal registration motor, DC controller PCB
Is the horizontal registration motor control signal generated by the DC controller
PCB?
J304-1/2: 24 V, J304-3/4/5/6: motor excitation signal
YES: The horizontal registration motor is faulty. Replace the motor.
NO: Replace the DC controller PCB.
As You can see, is better to call service.
Hope that helps!
9/19/2018 6:12:40 AM •
Canon...
•
Answered
on Sep 19, 2018
Canon lbp 3300 error code E805 0000
Code
E805-0000
Description
Fan error
The Fan was locked for a specified consecutive period of time.
Remedy
Check the connection of the Main Fan. 2. Replace the Main Fan.
9/11/2018 5:34:16 AM •
Canon...
•
Answered
on Sep 11, 2018
Ir3300
ir3300 canon copier showing error 000007
7/18/2018 6:40:27 AM •
Canon...
•
Answered
on Jul 18, 2018
As soon as I started
Hi Sir My name is Sreenivas
I have facing problem with E000602-003, please tell how to rectify this problem, thanking you sir
5/5/2018 3:15:00 PM •
Canon...
•
Answered
on May 05, 2018
Canon ir3300 code 805-0003 which fan problem
http://printcopy.info/?l=en&mod=erc&brand=canon&model=ir3300&code=E805-0003
Parts diagram at the web site , too.
Quoting:
Code
E805-0003
Description
The clock signal is absent for 5 sec or more after the fan drive signal has been generated. The detail codes of the fans in question are as follows:
curl reducing fan (FM4)
Causes
The fan wiring is faulty (short circuit, open circuit). The fan is faulty. The DC controller PCB is faulty.
Remedy
1. Foreign matter Is there foreign matter that prevents the rotation of the fan? YES: Remove the foreign matter. 2. Wiring, Connector Are the wiring and connector of the fan normal? Developing fan (FM1): DC controller PCB (J302B) Fixing fan (FM2): DC controller PCB (J308B) Curl reducing fan (FM4): DC controller PCB (J311B) Curl reducing fan (FM5): DC controller PCB (J311B) Electrical unit fan (FM3): main controller PCB (J1028) NO: Correct the wiring and the connection. 3. Fan, DC controller PCB Try replacing the fan. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.
Canon iR3300 Error Codes
5/3/2018 12:25:43 AM •
Canon...
•
Answered
on May 03, 2018
Canon ImageRunner 3300i
make sure all your cables are connected. i found the first part of the error "E000732" means a communication problem
4/16/2018 3:50:25 PM •
Canon...
•
Answered
on Apr 16, 2018
What is that eror code E000051-0000
E051-0000
At start-up, home position is not detected when the horizontal registration assembly is moved 100 mm in the direction of home position.
because The horizontal home position sensor is faulty or the horizontal registration motor is faulty.
2/23/2018 12:02:30 PM •
Canon...
•
Answered
on Feb 23, 2018
Not finding what you are looking for?