LG Wm2010cw Front Load Washer3.5 Cu. Ft. Factory Refurbished For Usa-17655 - Page 8 - Answered Questions & Fixed issues


I just finish repairing my LG front loader and this sounds like the same issue. The back of the drum has a spider arm and spindle arrangement (think that the name) the spider are was corroded and broke after 10 years, this puts the drum off balance and chews up the gasket. I had to also repair the wash tub where the drum had worn into it and JB Weld worked fine. It all seem to work fine now.

LG Washing... | Answered on Jul 01, 2019 | 350 views


Hello,
DL is indeed a door lock error. The code is generated when the CCU can't lock the door. Possible causes are door latch mechanism, connecting wiring, or the CCU. You could hear clicking from the CCU machine which indicated to me the CCU was trying to lock the door. It tries 6 times before setting the F/DL code.
?Check Door Lock/Switch Assembly for foreign objects
?Check Wire Harness connections to the Door Lock/Switch Assembly

All the best !

LG Washing... | Answered on Jun 30, 2019 | 191 views


CL is child lock. Hold child lock button for 3 seconds to unlock

LG Washing... | Answered on Jun 28, 2019 | 98 views


could be lid switch are some else, you should call techicain to help you out

LG Washing... | Answered on Jun 24, 2019 | 99 views


Possibly the circuit breaker failed and cannot be reset.

LG Washing... | Answered on Jun 23, 2019 | 1,022 views


Hello Johan,
This sounds like the pump has jammed up or the pump has failed. Remove pump and check wether there is anything jamming it up.
also if you put it on a spin cycle check if the pump is humming.
If Yes, there is your problem.
You will need to remove the pump to check that out.
Make sure it iturn freely.


https://www.manualslib.com/manual/645286/Lg-Wf-S1317t.html#product-WF-T1303TP

LG Washing... | Answered on Jun 22, 2019 | 981 views


Hello Reg,
Here is a couple of links that may help you in the repair. Good luck, JP
https://youtu.be/osTIeI7BIMI https://www.manualslib.com/manual/749659/Lg-Wt-H750.html#manual

LG Washing... | Answered on Jun 22, 2019 | 976 views


Hello Chris, Here is a link to the user manual. Hope it is helpful to you, best of luck. JP
https://www.manualslib.com/manual/646080/Lg-Wm2010c-Series.html#product-WM2355C

LG Washing... | Answered on Jun 22, 2019 | 986 views


Hello,
Here is something that has worked on some lg washers: unplug, wait five minutes, hold in power button for 15 secs, plug back in while holding in power button for another 15 secs, release. a supposed reset to control board.
I have also included a video link that may helpful to you.
Good luck,
JP
https://youtu.be/c2VypxOTExI

LG Washing... | Answered on Jun 21, 2019 | 120 views


Hello Tj Sunday,
The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a foreign object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer.
Good Luck,
JP
https://youtu.be/qa6_ViM3xug

LG Washing... | Answered on Jun 21, 2019 | 97 views


Hello Tj,
\The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a foreign object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer. https://youtu.be/qa6_ViM3xug

LG Washing... | Answered on Jun 21, 2019 | 95 views


If its flooding when the machine is off and water is still going into the machine, the inlet valves will be the fault. If its flooding when in use, there is a blockage or failure of the pressure switch or the pressure tube. These control the water level in the machine.

LG Washing... | Answered on Jun 16, 2019 | 104 views


This suggests a problem with the motor, the bearings or the suspension rods that hold the tub basket. In some cases, it could be caused by an object between the inner basket and the outer tub. The unit detects too much force on the motor or uneven forces as it spins and slows down even when empty. When there is a load, the washer stops to protect the system.

First try lifting up the inner basket and turning it a small amount. If this is difficult, one or more of the suspension rods and associated hardware should be checked and the damaged parts replaced. Check for and remove foreign objects between the basket and tub. Finally check the motor, motor shaft and bearings to determine which parts need to be replaced if the problem isn't corrected in the above steps.

I hope this helps.

Cindy Wells

LG Washing... | Answered on Jun 07, 2019 | 544 views


Probably something fallen out of clothing and catching on the drum.

LG Washing... | Answered on Jun 06, 2019 | 115 views

Not finding what you are looking for?
LG Wm2010cw Front Load Washer3.5 Cu. Ft. Factory Refurbished For Usa-17655 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...