LG Electronics 3.6 cu. ft. Front Load Steam Washer in White WM2650HWA - Page 4 - Answered Questions & Fixed issues


Yes , It can be related to the control board, but first of all please make sure that there is good water flows in both the inlets, check the flow after the valve , ensure that the inlet filters are not clogged and check all the connections from the harness to the valve and panel

LG WM Washing... | Answered on Jan 19, 2013 | 163 views


If it spins empty i'd check drive belt (if it has one) or motor. If it just won't spin i'd check the drain hose between tub and drain pump for debris. If no debris i'd check door switch.

LG WM Washing... | Answered on Jan 13, 2013 | 40 views


Who?

LG WM Washing... | Answered on Nov 02, 2012 | 23 views


Remove the top panel and you can pull the manual release.

LG WM Washing... | Answered on Oct 17, 2012 | 21 views


I was going to say fit new brushes

LG WM Washing... | Answered on Sep 27, 2012 | 433 views


The main switch probably needs replaced. It has its own separate motor, but if the machine goes through the earlier cycles it needs the switch.
murf427

LG WM Washing... | Answered on Aug 01, 2012 | 156 views


hi there, this could be one of two problems 1, you have a block in the waste pipe or pump? or 2, your drain pump has packed in and may need replacing?
however if memory serves me right there is an emergency drain tube on LG machines, it should be located behind the bottom pannel on the front of the machine and from there you should be able to release the water from the machine. hope this helps!

LG WM Washing... | Answered on Jul 04, 2012 | 105 views


Fortunately, you 1991 Dodge Shadow is not equipped with keys that have computer chips. Getting new keys made will not be very expensive. I would recommend contacting your local Dodge dealer or locksmith to have new keys made. They can cut new keys by using the VIN. This cannot be done online.

LG WM Washing... | Answered on Apr 06, 2012 | 29 views


I'm guessing it actually your water inlet valve. Bearing would only sound as drum spins. Does it sound as water is being let in?

LG Washing... | Answered on Feb 07, 2020 | 102 views


A slipping belt is the most likely cause, but the root cause may be a binding bearing causing it to slip. See how easy it is to turn the drum by hand?

LG Washing... | Answered on Feb 02, 2020 | 109 views


Yes, change the pulleys too. You can buy a kit

LG Washing... | Answered on Jan 18, 2020 | 122 views


TRY ASKING GOOGLE OR THE MANUFACTURER

LG Washing... | Answered on Jan 18, 2020 | 34 views


need new button board

LG Washing... | Answered on Jan 06, 2020 | 138 views


possible bad or loose belt on motor if ok bad transmission or motor

LG Washing... | Answered on Jan 06, 2020 | 115 views


Press POWER to turn the washer off.

Unplug the washer from the power outlet or turn the circuit breaker to the unit off.

With the power disabled, press and hold the START/PAUSE button for 5 seconds.

Plug the washer back in, or turn the circuit breaker back on.


Suggest you test the wall receptacle with some other known good appliance e.g. vacuum cleaner.

LG Washing... | Answered on Jan 03, 2020 | 116 views

Not finding what you are looking for?
LG Electronics 3.6 cu. ft. Front Load Steam Washer in White WM2650HWA Logo

Popular Tags

0 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...