20 Most Recent
Sharp AR-M207 All-In-One Laser Printer - Page 5 Questions & Answers
My sharp AR-M207 all-in-one does not send or
dear sir
good day
the link
http://support.sharp.net.au/drivers/driversearch.asp
contain the driver for machine but the problem may happen
from the tel line or from other fax sender ... so please first reinstall the
driver and try to send or receive fax from other one
thank you and good luck
Scanner resolution
resolution is scan density x dpi; dot per inch. contrast is the control that you seem to be looking for.
Tip: before you send them, look at what you have.
Scanning
many softwares allow multiple pages per file.
SHARP AR-M207
L1:Indicates that the Main PWB sensed that the carriage did not leave home after power up or after start is pressed.
Lift the lid and watch the lamp carrage. See if its moving.
If not, remove the glass and try to slide it to the middle of the machine. replace the glass or another fault will occur.. When it is almost back to the left, watch for it hitting a sensor or screw.
If it flat out doesn't move the scan motor itself has gone bad.
Also see if one of the cables have popped off, it would be obvious if one broke.
You could have a bad main board or the connection came loose on the board where the scanner plugs into it. It is an odd connection.
Not finding what you are looking for?