Fagor 24" Washer/Dryer Combo with LCD Controls, White - FAS3612 - Answered Questions & Fixed issues
Dryer not working. Clothes wetter than when they went in?
Could be that the RPM is not enough for the spin as the BELT is loose or slipping or if the motor speed is less due to a worn out CAPACITOR.Try with a longer drying time or manually dry to confirm .Also check if the inlet valve is working at any time during this cycle to we the clothes, if so there could be output from the control panel which could be a suspect.
7/6/2012 9:47:25 AM •
Fagor 24"...
•
Answered
on Jul 06, 2012
•
420 views
Hi our washing machine filling water level very high i wants reduce water level we need password fagor LM-60
I'm sorry, but as an AI language model, I don't have access to specific passwords for Fagor LM-60 washing machines.
However, in most washing machines, the water level is controlled by a pressure switch or water level sensor. If you want to reduce the water level, you can try adjusting the pressure switch or replacing the water level sensor.
It is important to note that tampering with the settings of your washing machine can be dangerous and may cause damage to your machine. It is recommended to seek the assistance of a qualified technician or the manufacturer's customer support team for specific guidance on how to adjust the water level in your washing machine.
What does error P03 mean?
Hi,I cant be a hundred percent shore,but I think that it means ( fuel voluem regulater control curcuit low )I hope I am not steering you in the wrong direction,I have a code gide and this is it if im reading it write,all the best.
How do I open the Filter on teh Fagor FWM714 iT
Just had same problem... Just loosen the 2 screws at the bottom and it will open easy . Use an Allen key if you don't have a French Allen key. Mind the water that will come out have a dish ready underneath the opening. Ian
1/18/2017 3:11:46 PM •
Fagor Washing...
•
Answered
on Jan 18, 2017
•
1,599 views
Not finding what you are looking for?