Top 20 HP LaserJet 1320 Printer - Page 2 Questions & Answers

hi The paper tray has a small lock at the bottom of the tray which is broken or dislocated hence try to fix it if its dislocated or you may have to replace the try itself. But still you can use it by adding paper to the full of the tray's capacity and pressing it gentelly downwards and push it back into the printer.

you might try a recycled cartridge and have a lot less invested.Sounds like your cartridge is empty.Is print quality bad or light?

may be problem with cartridge or scanner shatar......

may be out of paper ,or paper got jam,check properly & plz revert back.

That would be the attention light.... Indicates that the input tray is empty, the print- cartridge door is open, or bad toner. Is there any lights that are on solid or flashing? (could also have a bad fuser ... need to trouble shoot this a little more) If you hit the green button does it do anything? - www.trusttechnology.biz

Go To Below official HPPrinter Page For Your problem, HP Support document Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For HP Support

must be fuser unit, look for these signs : 1- upper roller damaged 2- does not have a "polished " finish 3-lower roller has ripples /waves on it

75% of all print defect problems with these printers are cartridges. Try a new cartridge first. If you are using refilled/remanufactured cartridges, do not expect the same level of black as true HP cartridge. Other 25% of problems are either dirt on the scanner or bad transfer roller. Try cartridge first!

This model does not have these features.

Check your paper tray, if the tray is ok look at the feed rollers.

Most probably due to overheating. Or maybe it is placed jn a damp area. Or due to internal laser heating element which is responsible for drying out the printed ink. Or other reason can be your system printer settings. Try them restoring to default first.

Restart the printer after checking for a piece of paper that may be stuck. Also check your pick up rollers.

it is not picking up the paper properly more then likely bad roller or just dirty clean with lint free cloth & alcohol including the seperator under the roller

No because you may get some paper dust on the sensors that will cause you problems.

Try changing the printer settings to print on both sides

Both LED are on. Or one of them. IF one Orrange LED on Means Paper Jam. Or out of Cartridge please check...

You may download the HP driver from http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid=410624&ac.admitted=1387471271532.876444892.199480143

chek usb cable or install proper driver

I think its logic board related problem.have a technician look onto it...