HP LaserJet 1320 Printer - Page 2 - Answered Questions & Fixed issues
Fails to print
Restart the printer after checking for a piece of paper that may be stuck. Also check your pick up rollers.
HP Laserjet 1320n Admin Password has been
joed_calcule
If you changed the password from the default one but forgot the one you set it too all you really can do at this point is set the printer back to the factory defaults. The menu options below will help you do this.
Advanced Printer Settings
Settings tab
Resets = Change all the printer settings back to the factory default settings.
Let me know if you have any more problems or questions
Issken
My printer hp-1320 Do not allow more than one paper problem
if its possible install the printer on another PC. if it prints god without problem than problem on your PC, follow this:
1. delete the device from "start-> control panel-> devices and printers (win7) or printers and fax (win xp) choice hp laserjet 1320 right click -> remove device. and delete driver software from control panel - > software " Than reinstall the software and turn on printer
2. try the new and the latest versions of drivers. you can search it in Internet pay attention to date of software
3. replace USB cable of printer sometimes it acts to work of printer, use original cable but no so long cable (1-1,5 metr)
4. if problem unsolved than the work to engineers,
recently we solved same problem on hp 2015, you must open covers of printer and access main board - formatter (where USB port exists), remove all wires and reinstall properly, if problem unsolved the formatter (look at the images) must be heated with special heating device. But its work of masters, don't try heat it if you are not specialist.
Hp 1320 drawer stuck
hi
The paper tray has a small lock at the bottom of the tray which is broken or dislocated hence try to fix it if its dislocated or you may have to replace the try itself. But still you can use it by adding paper to the full of the tray's capacity and pressing it gentelly downwards and push it back into the printer.
Xerox printer prints light
75% of all print defect problems with these printers are cartridges. Try a new cartridge first. If you are using refilled/remanufactured cartridges, do not expect the same level of black as true HP cartridge. Other 25% of problems are either dirt on the scanner or bad transfer roller. Try cartridge first!
Showing led not initaslisim
Both LED are on. Or one of them. IF one Orrange LED on Means Paper Jam. Or out of Cartridge please check...
Hp laserjet 1320 toner empty?
you might try a recycled cartridge and have a lot less invested.Sounds like your cartridge is empty.Is print quality bad or light?
Plain paper jaming in fuser unit
must be fuser unit, look for these signs :
1- upper roller damaged
2- does not have a "polished " finish
3-lower roller has ripples /waves on it
Not finding what you are looking for?