HP LaserJet 1320 Printer - Page 4 - Answered Questions & Fixed issues
How do I get a page count on my laserjet 1320?
You can see the the count in configuration page, to print configuration page do the following:To print the configuration page from the printer, press GO for 5 seconds, until the yellow light comes on, when the printer is in the ready state....
Black horizontal lines
recharge(with new OPC, PCR and mag roller) or try another cartridge - if problem not solved - fuser film damaged
Free download setup
Hi,Click on the link below to download the drivers for your Laserjet printer. Choose the operating system to download and install.
Download DriversRegards,Sean
HP laserjet 1320 pcl 5 in windows 7 does not duplex
Go to "Devices and printer" and right click on the 1320, go down to "printer properties" and click. When the new box opens click on "device settings" tab and scroll down to installable option and find Duplex unit. Be sure it is set to installed, if not set it. Now your printer should duplex again.
Hp laserjet 1320 paper jams constantly. not even
could actually be the paper your using. make sure your using at the very least multipurpose paper or laser paper. check to make sure your settings for paper is also set to regular paper and not cardstock or special paper or anything else
Free download setup
Visit the HP website, go for "support and drivers" .Entering the page find for product support and troubleshoot, enter you printer model no. and click on search.You will get the list of the printer, just click on your model and look for how to setup, install and configure and other related topics whichever is helpful to you on the next page.** You can also avail our technical support by visiting our website:
http://www.vtechsquad.com.
Hp 1320 three lights on
Remove mains plug for sometime, if after restarting if the panel does not work or take command it is possible that there are errors in the control panel , error in processor or memory.Click on
HP support
My printer hp laserjet 1320 output is light why
The two common things that cause this type of problem are: 1) low toner - remove the toner and shake it from side to side to distribute the toner evenly in the cartridge to test. If the print gets better then you need to get a new toner cartridge because your is almost out.2) The transfer roller that charges the paper to allow the toner to transfer to the page is worn out and will need to be replaced. The roller is user replaceable and comes in the maintenance roller kit that you can get here:
http://www.ccl-la.com/catalog/product_info.php?products_id=71Replacing the rollers takes about 10 minutes or less.I hope this helps you get your print going again.BuddyMc
Not finding what you are looking for?