20 Most Recent HP PSC 1610 All-In-One InkJet Printer - Page 3 Questions & Answers


best thing to do is get rid of the used cartridges and use HP OEM ink products- they might be costly but will work when asked to and wont ruin the inside of your printer and force you to buy a new one- once you have used a third party ink all your HP warranties were nullified,
THIRD PARTY INKS are NOT the way forward. their ink pigments are usually the wrong type and often not the right shade of colour, which will make colour prints look dull or poor colour calibration.

HP PSC 1610... | Answered on Sep 25, 2013


You need to purchase a cartridge designed to be used in the USA. The local cartridges are probably for Europe and are not the same.

HP PSC 1610... | Answered on Sep 12, 2013


try this.. i got the same problem before.. and the main problem is the NO MECH MODE.. try pressing the setup button then take the plug out of your printer.. (still pressing the setup button) and put the plug back.. and it will remove the no mech mode.. then you could print like before.. i hope this helps

HP PSC 1610... | Answered on Jul 15, 2013


Hi,

You dont have drivers for Deskjet F2100. You need to connect the printer via USB cable and the printer will be ready to print. To SCan a file, you need to use paintbrush or any other image application tool.

Regards,
Sean

HP PSC 1610... | Answered on May 29, 2013


You write "type the above line at command prompt". I dont't know Where exactly to write? Can you tell me!

HP PSC 1610... | Answered on May 19, 2013


Remove scanner glass, refix CCD cable & try. If problem persists replace CCD ribbon cable..
CCD snap shot:

1_28_2013_5_46_42_pm.jpg

HP PSC 1610... | Answered on Jan 28, 2013


If you are getting a 'carriage jam' error as soon as you turn on your printer with no tasks in progress, then check for any piece of paper stuck in the carriage. Remove the paper carefully. If the paper tears, part of it might remain inside the paper path and damage the product.

Follow the steps for fix HP Printer Carriage Jam

  • Turn off the printer and open it to see where the paper is stuck.
  • Manually move the carriage toward the opposite side.
  • Check the paper path and remove any piece of paper or any other object that is stuck in the path.
  • Reconnect the power cord and turn on the printer.

HP PSC 1610... | Answered on Dec 05, 2012


Have you tried unplugging from power source then turning back on? Then try run a test page..

HP PSC 1610... | Answered on Oct 10, 2012


clean the printed circuit side of cartridge then try again

HP PSC 1610... | Answered on Oct 02, 2012


Hi, the answer is no you cannot, the printer will only work if both cartridges (black and color) are installed, if you install just one the check print cartridge light will flash.

Hope this helps

Muzzi_123

HP PSC 1610... | Answered on Jul 25, 2012

Not finding what you are looking for?
HP PSC 1610 All-In-One InkJet Printer Logo

958 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

turn off when im done using

  • Office Equipment & Supplies
Loading...