20 Most Recent HP PSC 1610 All-In-One InkJet Printer - Page 9 Questions & Answers


if the tol box was installed, open it and run the scrubber utiity. Then unplug the printer from the PC and re-install the driver, when asked, connect the printer.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=ca&dlc=en&sw_lang=&product=390325

HP PSC 1610... | Answered on Jan 15, 2011


jim@bigdork.net
Thanks fixya.com
You helped me CLEAN the HP PSC 1610
it had MASIVE amounts of waisted ink
in the area that it WANTS to waste ink
to keep the cartridges FLOWING...
BUT... NOW ... HERE IS A SOLUTION TO
THE CLICKING NOISE
THE RATCHIT NOISE
HP PSC 1610 NOISE
It seems that HP (as with most all manufacturers)
has DESIGNED-IN A PART THAT WILL BREAK ! ! !
PICTURE ATTACHED
explanation...
opened the mid section of the printer
moved the ink holder module to the far left
pushed the cleaning tray
(it moves to you and away from you)
away towards the rear of the machine
used masive amounts of isopropyl alcohol
and an old toothbrush
to clean most of the gunk ink buld-up
(started with q-tips but it was not enough)
After cleaning ... the machine worked again...
BUT
that noise was still there
after carefull inspection
I saw the problem
there was a hairline crack in a small plastic part
above a rotating gear
when the carriage came to the right
it was suposed to move that part
off or away from the gear
but because it was cracked
it did not move properly
SOLUTION
crazy glue or super glue
and shim to hold in place while drying
(maby heat with a light bulb while drying)
SEE ATTACHED PHOTO WITH NOTES....
JIM_487.jpg

HP PSC 1610... | Answered on Jan 15, 2011


my printer is an hp but not the model. i was having the same error though. i unplugged the power from the back for 20 seconds,held the power button while plugging it back in, then held the # and 6 while turning it back on and that fixed it

HP PSC 1610... | Answered on Jan 13, 2011


We need to check few things here and for that we need a test page


Make sure your printer is ON and unplug the power cord

Now Press and Hold OK and Cancel button at the same time and while holding them plug in the power cord

Once the printer turns on it will say "Derive Clear"

Now press the Right arrow until you see " Service Menu"

Hit Ok here

Now look for print 10 tap test

Hit ok

---------------------------

It will print a test page


Now look at Line 66

And let me know the STAT value it can be 0, 1 or 2

0- Cartridge fine - problem with printer

1- Problem with cartrdige

2- Check the tape on the cartridge

HP PSC 1610... | Answered on Jan 10, 2011


http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=uk&lang=en&product=390315&

Above link to drivers and manuals, choose your OS from the drop down list

HP PSC 1610... | Answered on Jan 08, 2011


HP 94 Black (480 pages)

HP 95 Tricolor (330 pages) or HP 97 Tricolor (560 pages)

HP 99 Photo (130photos)

See here for inofrmation on various value packs:

http://www.shopping.hp.com/webapp/shopping/supplies_model.do?product_code=Q5587A&aoid=5504&lang=en&cc=us

HP PSC 1610... | Answered on Jan 07, 2011


Unplug the power cable of the printer whilts its ON

Now press and hold "OK" and "CANCEL"

While holding them plugin the power cable and release the buttons

it will reset the printer and should fix the problem

HP PSC 1610... | Answered on Jan 03, 2011


If the scanner light is on, the problem is possibly a driver issue, sometimes the drivers become corrupted. Download the drivers from the HP site and try re-installing, you might need to remove the old drivers first. If this does not cure it, there is likely to be a problem with the scanner lamp

HP PSC 1610... | Answered on Jan 02, 2011


hi

send me 4 thumbs up please...

go to this link to retrive your manual

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=ca&product=390328&lang=en&

HP PSC 1610... | Answered on Dec 30, 2010


do u want answer call me 9966295175

HP PSC 1610... | Answered on Dec 24, 2010


It sounds to me like you have selected an option to print directly from a memory card at one time. Here are excerpts from the user manual for your machine to change printer settings:

Change the print settings

You can customize the print settings of the HP All-in-One to handle nearly any print

task.

Windows users

Before you change print settings, you should decide if you want to change the settings

for the current print job only, or if you want to make the settings the defaults for all

future print jobs. How you display print settings depends on whether or not you want

to apply the change to all future print jobs or just to the current print job.

To change the print settings for all future jobs

1. In the HP Director, click Settings, point to Print Settings, and then click Printer

Settings.

2. Make changes to the print settings, and click OK.

To change the print settings for the current job

1. On the File menu in your software application, click Print.

2. Make sure the HP All-in-One is the selected printer.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties,

Options, Printer Setup, Printer, or Preferences.

4. Make changes to the print settings, and click OK.

5. Click Print or OK in the Print dialog box to print the job.


I believe that this should help you get around your issue. Here is a link to the entire user manual for future reference.


http://h10032.www1.hp.com/ctg/Manual/c00276605.pdf

HP PSC 1610... | Answered on Dec 22, 2010


1. disconnect it from any other devices.
2. turn the printer off and unplug it.
3. plug it back in and try again.

HP PSC 1610... | Answered on Dec 16, 2010


Go to remove and check color cartridge .

If you need more help come back.Post / thumbs / testimonial are welcome!

HP PSC 1610... | Answered on Dec 15, 2010


  1. Remove the rear cleanout from the printer.
  2. Gently remove any jammed paper or bits of paper.
  3. Close the HP Paper Feed Cleaning Kit software on the computer.
  4. Load plain paper in the printer paper tray.
  5. Press the Power button to turn the printer off.
  6. Press the Power button to turn the printer on.
  7. Try printing again. If the printer still does not pick up paper or if a paper jam occurs again, service the printer.


Other solutions customers found helpful » HP Paper Feed Cleaning Kit -- Clean the Paper Feed Rollers with the HP Paper Feed Cleaning Kit in Windows XP and 2000 » HP Deskjet, Photosmart, and PSC All-in-Ones -- 'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper » HP PSC 1600 and 2350 All-in-One Series Printers -- 'Paper jam: Press OK to continue' Message Displays on the All-in-One

HP PSC 1610... | Answered on Dec 15, 2010


first select the report in tally what u want to print through print option (Alt P) and then go to printer selection through Alt S (in this option u select the printer whichever u want)

HP PSC 1610... | Answered on Dec 11, 2010


Sounds like your black cartridge is empty and the printer is defaulting to your color cartridge. Check ink level in black cartridge by using the troubleshooting instructions that came with your printer. If you don't have a manual on your computer you can try finding the instructions by accessing the manufacturer's website. Good luck!

HP PSC 1610... | Answered on Dec 09, 2010

Not finding what you are looking for?
HP PSC 1610 All-In-One InkJet Printer Logo

958 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

turn off when im done using

  • Office Equipment & Supplies
Loading...