HP PSC 1610 All-In-One InkJet Printer - Page 8 - Answered Questions & Fixed issues
Where do i put the ink?
Above the paper tray, there's a panel with a round notch. Pull down on the notch and a panel will open. The printer carriage will then move to the center of the printer where you should see 2 ink tanks. The black tank is #56 and the color is #57. Simply push down on the top of the ink tank to remove. Then remove the protective film on the new cartridge and push in-and-up until it clicks in. When you are done, push the panel back up and you will hear the ink tanks move back and forth until they finally stop in the printing position.
11/23/2010 6:49:04 PM •
HP PSC 1610...
•
Answered
on Nov 23, 2010
•
23 views
My hp psc 1610 keeps
clean paper rollers with a lint free damped cloth then blow some air into paper compartment.
pls. vote for better sharing... thank you
11/21/2010 1:11:41 PM •
HP PSC 1610...
•
Answered
on Nov 21, 2010
•
116 views
I'm getting a blinking error message 0x841270671
Hi Good day!! Try to re install your printer driver, uninstall the printer driver and then install your printer using CD. if you don't have CD for your printer click here:
http://www.hp.com/#Product go to support and driver and then follow the step given.
Hope it helps you
Thank you for using FixYa
Don't forget to vote thanks!!
11/19/2010 3:42:15 AM •
HP PSC 1610...
•
Answered
on Nov 19, 2010
•
284 views
How can an HP 1610 used as a scanner
There are too many steps to describe so I would suggest you have a look at the manual available at
http://h10032.www1.hp.com/ctg/Manual/c00276605.pdf
11/13/2010 5:17:53 AM •
HP PSC 1610...
•
Answered
on Nov 13, 2010
•
43 views
How do I reset the
Follow these steps to change language setting on the printer display :
1.On the printer control panel, press the Left arrow twice or the Right arrow seventeen times on the Menu button until SELECT LANGUAGE? appears on the printer display screen.
NOTE: If the language is currently set to a language other than English, the Select Language? menu option will appear in that language.
2.Press the OK button.
3.Press the Left or Right arrows on the Select Photos button until your desired language appears.
NOTE: Even if the printer is currently set to another language, the name English will appear in the English language.
3.Press the OK button to select the language. A message requesting confirmation of the selection will appear appears. If the correct language is displayed, press the OK button. If the incorrect language appears, press the CANCEL button and start the selection process again.
4.When the SELECT COUNTRY/REGION? setting appears on the printer display screen press the OK button to continue.
5.Press the Left or Right arrows on the Menu button until the desired country/region appears on the printer display screen.
6.Press the OK button to select the country/region.
11/7/2010 4:27:12 PM •
HP PSC 1610...
•
Answered
on Nov 07, 2010
•
520 views
Please tell me how to
Hi
you need to reinstall your printer using olny your cd
1.disconect your printer
2.run setup from your cd
3.connect the printer only when setup ask you to do it
PS vote us to keep us alive
11/7/2010 4:06:46 AM •
HP PSC 1610...
•
Answered
on Nov 07, 2010
•
33 views
Paper stops printing halfway through and says
This issues looking printer head problem. check the following Steps for cleaning printer head :
Click on the Start button if you have Windows XP. If you have Windows Vista, click the Windows icon that resides in the lower left corner of your computer screen.
Click on "Control Panel," then "Printers and Other Hardware." Finally click on "View Installed Printers or Fax Printers."
Right-click on the name of your printer and choose "Printing Preferences." This should open a new window; next look for a tab or button marked Maintenance, or something similar.
Find the button that says "Print heads" or "Clean the Print heads" and click on it. You may be asked to choose which print heads; choose them all if you are. Make sure there is paper and ink in your printer, and that it is turned on ahead of time.
Take out the page your printer has printed and see if there are any grids or boxes missing. If there aren't, then you can just exit the program--your print heads are not clogged. If there are grids missing, then click on the "Cleaning" or similarly worded button.
Once the cleaning process has completed, print another page to be sure that your print heads are no longer clogged. If they are still clogged, repeat Steps 1-5 until your printer is printing clearly.
11/4/2010 4:16:59 AM •
HP PSC 1610...
•
Answered
on Nov 04, 2010
•
76 views
Receiving Error: 0x8392b78c
Do this:
-
Without turning off the product, disconnect the USB cable from the rear of the product.
NOTE:
The USB cable connects to the port on the back of the product. The port is labeled with the USB icon (
).
Figure 2: Example USB connection (your product might not look exactly the same as this example)
-
Remove the cartridges from the product.
-
Wait for the 'Insert Cartridges
' message to display on the control panel.
-
Disconnect the power cord from the back of the product.
-
Wait 60 seconds.
-
Reconnect the power cord. If the product does not automatically turn on, press the Power button (
).
-
Reinsert the cartridges, and then close any open doors on the product.
-
If you receive a prompt to print a calibration page, do so.
-
Reconnect the USB cable to the rear of the product, and then try printing again.
Solution two: Service the product
If you have completed all the steps listed above and are still experiencing a problem, service the product.
11/2/2010 11:21:22 PM •
HP PSC 1610...
•
Answered
on Nov 02, 2010
•
83 views
Not finding what you are looking for?