20 Most Recent
HP Color LaserJet 2600n Printer - Page 3 Questions & Answers
Can't find system setup
As this is network printer it should be reachable from internet browser. You just have to check what IP was assigned to the printer and point your browser to it.
8/24/2015 6:32:07 PM •
HP Color...
•
Answered
on Aug 24, 2015
My printer says there is a jam in the output bin
Hi,
Just try the steps
Jam in output bin - fuser area
Error messageJam in output binalternates withOpen door and clear jam
DescriptionA paper jam has occurred in the output bin near the fuser area.
Action
- Clear the jam.
-
Press the (SELECT) button on the control panel.
Jam in output bin - duplex area
Error messageJam in output binalternates withOpen door and clear jam
DescriptionPaper jam in duplex reversing area
Action
- Clear the jam.
-
Press the (SELECT) button on the control panel.Please Rate my response!!!Thanks, SF
5/11/2015 12:49:29 AM •
HP Color...
•
Answered
on May 11, 2015
Hp color laserjet 2605dn leaves bluish green lines on prints
Print quality issues can be due to a number of things. There may be a defect in the cyan toner cartridge causing it to leak excess toner. The transfer belt could be dirty or defective. The printer may simply need cleaning. Given that you posted this question during the winter, it's also very likely a low-humidity environment is causing a high-static condition, randomly pulling extra toner onto the page. The easiest thing to do is clean the printer. Take a vacuum with a small attachment and clean out any excess toner. If you have canned air or a vacuum with a blower you should also blow out toner from any crevices that may not be reachable with the standard vacuum.If you have a spare cyan toner, you can try installing that and printing a series of test pages. The built-in demo pages are good as they will use a fair amount of toner and should help gauge if this solution helps.The transfer belt is the most expensive component to replace in the printer. If it needs replacement you will have to contact an authorized HP service company. However, before doing that, you should try the above steps and run a few iterations of the built-in cleaning process. You can navigate the printer's menus to find this function.Many people over-look low-humidity and static conditions, or do not believe they could have an effect on laser printers. However, static charge is the very principle on which laser printers work and is how the toner is transferred to and held on the page before it is run through the fuser. Low humidity can easily cause dirty printouts. Try placing a ream of paper in a more humid area for a couple days, then load the printer with that paper and print several test pages. You can also try placing a humidifier near the printer and leave it running for several days and try printing test pages again. If this solves the issue, maintain a humidifier in the proximity of the printer for the duration of the season until the weather warms up and the average humidity increases.
3/8/2015 5:10:26 PM •
HP Color...
•
Answered
on Mar 08, 2015
Fix Paper crinkling on the left of each page starting about half way down?
Crinkling paper is usually due to either an obstruction in the paper path or a bad fuser, which is the part of the printer that heats the toner so it melts to the page. It is located at the top of this printer. It can be a little challenging to see the fuser on this model, but if you look close you should be able to determine if the fuser is bad. You might also have a bad transfer belt, inspect it closely on the side the has the crinkle.
3/6/2015 6:45:39 AM •
HP Color...
•
Answered
on Mar 06, 2015
HP2600n color printing not registering
Looks like theres a problem with the color ragistration.
I would calibrate the printer. Heres how;
- Go to "System Setup" on the display. Press Select.
- Go to "Print Quality". Press Select.
- Go to "Calibrate Color". Press Select.
- Go to "Calibrate Now''. Press Select.
- Press Select again to confirm Calibrate Now.
This will calibrate the printer and should eliminate the color registration problem you are having.
1/27/2015 4:12:22 AM •
HP Color...
•
Answered
on Jan 27, 2015
How to hook up wifi connection up to hp color laserjer 2600n printer
Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer.
Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.
10/14/2014 4:09:51 AM •
HP Color...
•
Answered
on Oct 14, 2014
How to hook up wifi connection to hp color laserjet 2600n printer
Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer.
Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.
10/14/2014 4:08:33 AM •
HP Color...
•
Answered
on Oct 14, 2014
Why i can not remove toner cartrigde in hp 2600
There is a cartridge lock that is linked to the transfer belt and front door. If that link breaks the locks may not disengage. Usually the jam so that you cannot insert a cartridge. Look for the white or black hooks on the left and right side of the printer cavity. You may be able to shift them up with a small screwdriver.
9/5/2014 4:42:56 AM •
HP Color...
•
Answered
on Sep 05, 2014
Not finding what you are looking for?