20 Most Recent HP LaserJet 1020 Printer - Page 4 Questions & Answers

HP LaserJet 1020 Printer Drivers

Please find below the link to download the drivers for your printer

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=439320#N190

remember to copy this into a CD for future use

Drivers and software for HP 1020 can be downloaded from HP official site. Choose you operating system and download the required files


Hope this helps!
CreativeTECH

Hi,

You can download the installation driver and software from manufacturer's site by clicking this link

• On the page which opens, select the operating system of your computer (Windows Xp/ Vista..) and download the required drivers and software.
• The list of available drivers will load only after selecting the operating system of the computer.

Hope this solves your problem. Thanks for using FixYa.

Go to lexmark, click drvers-downloads , type laserjet 1020 into the box, choose your OS and download your files, or click HERE

You can download the software ' driver from the HP support site. http://hp.com

Hello, I dont belive the printer is the problem. The printer prints what you tell it to print, but in any case you can download and install a new drivers form the producers site.

install the printer driver and connect with usb print cable , check pepar size and give print comment, again its not printing ? try to change data cable try again. last option change formatter board.

slamat malam Admin...saya memiliki kendala dalam mengeluarkan kertas yang tersangkut didalam printer HP LaserJet P 1102. tks

Horisontal line: I assume you mean a line across the paper movement direction. Please, inspect if the line is repeating on exact distance from one to the other. Measure the distance, divide by Pi (3.14) and you'll get the diameter of the faulty roller. Also, please, make a half print test page (open the cover in the middle of the printing process). Inspect if the line is appearing before the fusing unit or after it. Try printing with different cartridge, just to be sure the cartrige is causing the problem. Primary charge roller and its bearrings can be dirty and not charging enough the drum, causing black lines Weared stripe on the OPC drum caused by friction with jammed paper improperly pulled out can also be the root of the problem. Faulty laser-scanner unit can also write black lines randomly. Weared teflon sleeve on the fusing unit can accumulate toner and print repetitive defects.

Go to the link, http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=378054&ac.admitted=1412425917621.876444892.199480143 . Choose a language & operating systems.

Is your computer recognizing it? Try opening your Control Panel in Windows, find Devises and Printers and see if its listed. If not disconnect it from computer, then reboot. Hook it back up again, reboot your computer and see if Windows finds it. Also check to see if the printer is set as default printer. If not set it as such. Try it again.

My solution already posted in FIXYA.. for the same complaint earlier.pl go through.. http://www.fixya.com/support/t10478324-printer_taking_two You need to clean the paper pick up solenoid located at down right side ...gently remove & clean it as shown..best of luck..

Did you remove the new cartridge to make sure it isn't a paper jam and also to get a better look at the interior?

Pull out the toner tank/cartridge and examine it very well it is possible some pieces of the paper are still left in there. Then restart the printer.

I think you must stop printing for a continuous period of more than 15 mins of printing. Wait at least 5 mins for the printer to cool down internally and then you can start printing again, but not more than a continuous 15 mins.

Clean printer head with clean damp lint free cloth see if that works if not, print heads do wear out sadly.

if paper is stuck in the paper drum then take out the toner then open the catridge covering flap and try to get paper out if then also paper doesn't come out open the screw on the right side of the catridge and open the cover,catridge shouled be sepaparated in two parts and paper will be out now...Otherwise use the twizer to pull the paper.

The solution to this problem is as simple as disconnecting your printer, going into CONTROL PANEL / PRINTERS AND SCANNERS, right click on the icon for your laser printer, then select "remove." Once you have removed the printer in the Control Panel, plug the printer back into your USB port, power it on, and it should plug & play from there.