HP LaserJet 1020 Printer - Page 3 - Answered Questions & Fixed issues

A cold reset should not reset the print count. Those are usually stored in non-volatile memory to prevent scammers from selling used products as new.

Hello, I dont belive the printer is the problem. The printer prints what you tell it to print, but in any case you can download and install a new drivers form the producers site.

install the printer driver and connect with usb print cable , check pepar size and give print comment, again its not printing ? try to change data cable try again. last option change formatter board.

Horisontal line: I assume you mean a line across the paper movement direction. Please, inspect if the line is repeating on exact distance from one to the other. Measure the distance, divide by Pi (3.14) and you'll get the diameter of the faulty roller. Also, please, make a half print test page (open the cover in the middle of the printing process). Inspect if the line is appearing before the fusing unit or after it. Try printing with different cartridge, just to be sure the cartrige is causing the problem. Primary charge roller and its bearrings can be dirty and not charging enough the drum, causing black lines Weared stripe on the OPC drum caused by friction with jammed paper improperly pulled out can also be the root of the problem. Faulty laser-scanner unit can also write black lines randomly. Weared teflon sleeve on the fusing unit can accumulate toner and print repetitive defects.

Go to the link, http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=378054&ac.admitted=1412425917621.876444892.199480143 . Choose a language & operating systems.

Is your computer recognizing it? Try opening your Control Panel in Windows, find Devises and Printers and see if its listed. If not disconnect it from computer, then reboot. Hook it back up again, reboot your computer and see if Windows finds it. Also check to see if the printer is set as default printer. If not set it as such. Try it again.

My solution already posted in FIXYA.. for the same complaint earlier.pl go through.. http://www.fixya.com/support/t10478324-printer_taking_two You need to clean the paper pick up solenoid located at down right side ...gently remove & clean it as shown..best of luck..

Did you remove the new cartridge to make sure it isn't a paper jam and also to get a better look at the interior?

Pull out the toner tank/cartridge and examine it very well it is possible some pieces of the paper are still left in there. Then restart the printer.

Hello, remove the cartridge and check inside the printer, on the left side of the sponge roller about 1 inch/2.5 cm down, there is a lever that engages a flag at the back of the printer ( the sensor in case tells the printer that the cartridge is in the printer) check that lever and make sure it moves freely. If there is a pice of paper behind that lever, when you insert the cartridge the lever will not go all the way.

I think you must stop printing for a continuous period of more than 15 mins of printing. Wait at least 5 mins for the printer to cool down internally and then you can start printing again, but not more than a continuous 15 mins.

Clean printer head with clean damp lint free cloth see if that works if not, print heads do wear out sadly.

if paper is stuck in the paper drum then take out the toner then open the catridge covering flap and try to get paper out if then also paper doesn't come out open the screw on the right side of the catridge and open the cover,catridge shouled be sepaparated in two parts and paper will be out now...Otherwise use the twizer to pull the paper.

The solution to this problem is as simple as disconnecting your printer, going into CONTROL PANEL / PRINTERS AND SCANNERS, right click on the icon for your laser printer, then select "remove." Once you have removed the printer in the Control Panel, plug the printer back into your USB port, power it on, and it should plug & play from there.

May be paper Jam in the Track

Hello, the problem is not with the printer. Clasic case: you need to print 20 pages on both sides, you select print on both sides (manually) and make sure you only have 10 sheets of paper in the paper tray, you give the comand to print, after the even pages are all printed you flip them in the paper tray, at this point the printer will print the uneven pages. If you have more than 10 pages in this case the printer will print continuos because the paper tray has a sensor for the presence of the paper. Hope this hepls, I'll wait on your feedback.

Hi, I share a link please visit and follow step by step instruction. I hope solved your issues. http://ulearnoffice.com/word/printing.htm Thanks, HP Printer Support

Do you mean how many pages does the P1005 print before it requires replacement? Here is the service manual, it is the fuser fixing sleeve: http://www.lbrty.com/tech/Manuals_HP/P1000sm.pdf A youtube video on the procedure: https://www.youtube.com/watch?v=dSenawkbM3M The part on Ebay, it mentions 30,000 pages: http://www.ebay.com/itm/1x-Fuser-Film-Sleeve-HP-LaserJet-P1005-P1006-P1007-P1008-Grease-Grade-A-manual-/270940113101

Did this just suddenly happen or was it after you replaced the toner cartridge or opened the door?
I have found that if the toner cartridge is not completly positioned into the printer, it can give this error.

This sort if thing is acually caused by a mark on the drum. Check to see if it comes out on this printer and see if it is scratched. Drums are usually a user replaceable part that can be purchased from HP or other HP stockist