20 Most Recent HP DeskJet 5550 InkJet Printer - Page 3 Questions & Answers

there must be a message(error) ????

Please explain "transfer kit"

Have you check your color cartridge if they are properly installed.Make sure your are not using a refill cartridge.Replace your tri-color cartridge with original an HP tri-color cartridge.

<a href="http://www.dreamout.co.uk" style="color:#EE0000;">Rosetta Stone</a> - <a href="http://www.dreamout.co.uk" style="color:#EE0000;">What Is the Rosetta Stone</a>.Learn to speak Spanish with <a href="http://www.dreamout.co.uk" style="color:#EE0000;">Rosetta Stone spanish</a>

Make sure the installed cartridges are original and the right numbers 56 black and 57 tri-colour

That is probably the Timing Belt.Without out that, the printer can't print. It's like blindfolding a golfer on the putting green. He won't have a clue to anything. Get it checked out.

To get the page count on a Deskjet 5550:- Hold down the Power button.- Press the Resume button 4 times (without letting go of Power).- Let go of the Power button.A self test page will print out containing the page count.For page count or configuration page instructions for other printers, copiers, and fax machines, check out How to Print Configuration Pages.

Hi

Take out the ink cartridges and reseat it again. If you have low ink, then replace it with new ones. The printer will be good to go. One or both print head are defective. Open cover put out color cartridge then close cover. If blinking stops replace color cartridge. If blinking continues put out black cartridge and put in color. If blinking stops replace black cartridge, if not stop replace both cartridges.

Please get back to us if you have further query or else please accept this "particular" solution.

Thanks for contacting fixya.com

hi..........

In this error condition, the following light pattern displays on the product control panel and a message might display on the computer:

• Print Cartridge status light : On
• Resume light : Off
• Power light : On

Figure 69: The Power light is on and the Print Cartridge light blinks

Causes
• The cover on the product might be open.
• There might be a problem with one or both cartridges.

Solutions Follow these solutions in the order presented to resolve the issue. Solution one: Close the top cover on the printer

1. If the cover on the product is open, close it.
2. Press the Resume button ( ) to continue printing.

Solution two: Determine the cartridge issue When there is an issue with a cartridge, a yellow arrow on top of the carriage (inside the product) points to a drawing of a cartridge that indicates what the issue is. Follow these steps to determine the cartridge issue, and then continue to the next section for solutions to resolve the issue.

1. Open the top cover on the product. Wait for the carriage to move. The yellow arrow on top of the carriage (inside the product) points to a drawing of a cartridge that indicates what the issue is.
2. Look at the drawing and then find the icon in the following figure that matches the drawing. Each of these icons represents a different cartridge issue. Use the icons to determine the cartridge issue. Figure 70: Determine the cartridge issue 1 - Tri-color Cartridge Problem icon 2 - Black Cartridge Problem icon 3 - Tri-color Cartridge Low-ink icon 4 - Black Cartridge Low-ink icon 5 - Cartridges OK icon

I hope this solution will helpful for you
Please don't forget to click on Four thumbs which are given below & then write testimonial for my appreciation if it is helpful
THANKS & Keep Using fixya

In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.

It sounds like our PC is setup to require an administrator password for any installs. If your PC is in a corporate environment then you will need to contact your IT support to resolve this. If it is home use, then you will need to log in as administrator, with your password.

Hi, This could be Low-Ink or paper Jam. Try turning off The printer, Unplug from The Mains Electric, for 3-5 Minutes. Turn back On, if Lights Are Still There. Check The Ink-Levels. And Replace Cartridges, if necessary.
Mike.