20 Most Recent Miele Novotronic W1918A Front Load Washer Questions & Answers

Miele Novatronic W360

there is still water in the waterproof tray at the bottom of the machine and the float switch has activated. pull the machine out (if pipes allow) and tip the machine backwards to drain the water from the tray.

Miele Novotronic... | Answered on Dec 15, 2018

1 Answer

Miele w1918 water leaking from drain housing where

There is a seal in the pump housing, but u have to take off everything to replace that seal! The manufacturer recommends replacing the PUMP ASSEMBLY itself when there is LEAK. The leak are caused by debris from clothes and materials u left in ur pockets. The cleaning of filter in ur drain system is 6 months and a tiny SOLiD materials will cause havoc to ur impeller pump itself! U could try repaing the seals in the pump or buy whole assembly! Hope that might help u out! Taah!

Miele Novotronic... | Answered on Aug 17, 2018

0 Answers

Miele Novotronic W1918A Front Load Washer is DEAD

Miele Novotronic... | Posted on Feb 27, 2018 | Be the first to answer

0 Answers

I have a Miele Novotronic

Miele Novotronic... | Posted on Sep 26, 2017 | Be the first to answer

3 Answers

I have a Miele W1918 washer which has worked

I have exactly the same problem. I am currently getting around the issue by letting the machine do the washing then at the end of that cycle do a manual rinse cycle.

Miele Novotronic... | Answered on Sep 25, 2017

0 Answers

Miele Novotronic w963 motor does not turn after water filling

Hello, my question is, I have washing machine MIELE NOVOTRONIC W 963, is broken, Which Miele model HAVE SIMILAR MOTOR ,thank you . William

Miele Novotronic... | Answered on Jul 10, 2016

1 Answer

Washer is not spinning the clothes

What is the make and model? It is most likely a balance switch or lid switch fault causing the issue.

Miele Novotronic... | Answered on Jun 17, 2016

1 Answer

Where can I purchase a replacement 120v drain pump assembly?

Go to www.repairclinic.com and enter W1918A. You should be presented with a list of common replacement parts (if available). Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Miele Novotronic... | Answered on May 06, 2016

0 Answers

Fabric softener dispenser clogged

Miele Novotronic... | Posted on May 11, 2015 | Be the first to answer

0 Answers

Miele w1918. Low in flow of cold water in Rinse 1 cycle. In Pre-wash cycle there's a strong in flow of cold water. However, in Normal rinse the in flow of cold water is low causing the faucet symbol t

Miele Novotronic... | Posted on Feb 11, 2015 | Be the first to answer

1 Answer

How to unlock washing machinge

Question is somewhat ambiguous, since in normal operation the door "unlocks" when the cycle is finished and the orange DOOR button is depressed. To manually open the door mid-cycle or with no power, find the yellow plastic tool attached to the soap tray and use it (or something similar) to pry open the front access panel at bottom left. There will be a plastic ring projecting downward into the cavity behind this panel: pull it sharply downward and the door should open.

Miele Novotronic... | Answered on Jan 26, 2015

2 Answers

I cleaned out the fluff filter on my Miele W1918

hi,

the fluff filter just needs hand tightening up a bit more to stop the leak. if not there could be a bit of fluff trapped between the seals. Remove it again and have another look. Make sure also you don't cross thread the fluff flter which makes it feel like it is screwed in properly when it isn't

Miele Novotronic... | Answered on Nov 02, 2014

0 Answers