20 Most Recent
LG Studioworks 700S 17" CRT Monitor - Page 5 Questions & Answers
Vertical booster problem
check the resistor that supplies the vertical ic this must be open the supply of the vertical ic comes from the plyback replace the resistor connecting to it..
pls rate my help
How to repair no screen
Often problems with LCD monitors can be traced to bad capacitors. The following sites will help you identify if your monitor has bad capacitors, and how to replace them.
www.fixyourmonitor.com and http://www.youtube.com/watch?v=9Q6_TgNJvQw
Good Luck!
My monitors picture becume yello
1. check its cable, pins ETC.
A CRT that changes colors likes this is due to a faulty connection bent pins on the d-sub, bad connections inside solder and otherwise, To bad cable itself.
check that out let us know please do leave postive feedback and ratings for the free answer today. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
My brother placed a magnet on my moniter screen
Have you displaced the magnet now? if not do it. Even after displacing the magnet retains the problem, you need to again keep the magnet as it was placed last time, this will discharge the electromagnetic process. Good luck
My monitor displaying yellow color in place of
right click on the desktop ...properties...settings (should be the last in the right ) ..than advanced..and should display the monitor settings ..there get them one by one cause there are more then one setting and try to default them ...i fthe color is not getting to normal than reinstall the video card ..and after that if is still the same it means that something is broke in the monitor ...and need a proper fix..at the shop ...or ..if it is a cheap one ..just get another form a second hand dealer until you will afford a good one ..
How to open notch lg700e crt monitor 17''
put the crt screen downward pull plastic button and keep pulled then give the shock to base the base will be removed then take the flat screwdriver then look the gap at upper side and insert the screwdriver into it move screwdriver downwards there are two locks bend it by screwdriver the monitor will be opened
Hi, i have a lg monitor studioworks 700s
connect internet then right click on my computer then click on properties then click on device maneger then right click on monitor then click on properties then select drivers and click on update driver it will automatically install the driver by searching web
Monitor problem
no that is a problem of microcontroller chip inside the monitor ti becomes faulty because of virus inserted in the monitor and chip bacame faulty try if anywhere it formatted and reprogrammed
Resolution problem
This monitor's standard resolution is 1280x1024. I would update your graphics driver. Just go into System Properties, and open up the Device Manager. (Press WinKey+Pause/Break key to open System Properties, and Device Manager is in the Hardware tab.) Locate the graphics driver in the Device list, right click and update the driver.
Not finding what you are looking for?