20 Most Recent LG Studioworks 563N 15" CRT Monitor - Page 9 Questions & Answers

call around to shops in your area

i don't know. when i have vrouter questions, i call my internet service and talk to techs. they help at no charge.

Hi aubyone

Is this a copy of a game or the original. If you're trying to play off a copy, then the game is 10 to 1 copyprotected. You get this problem when a copy protected game is copied and trying to play it from the copy.

your tv needs some service this problems are not expensive get it to repair shop before this trouble get it worse

no PC stated no OS stated windows is this a desktop or laptop or notepad you posted to computers so......

Para estar mas Seguro de lo que necesitas... Primero connectate con E-bay, o Amazon y pon los datos de LG Flatron. accessories. ^Tienen Chat. y te pueden ayudar . Si no, o si es nuevo, en los folletos de instucciones te derigen.

might be flat laptop battery. Check power plug adapter working and check the dc power plug into laptop is plugged in fully.

https://www.technobezz.com/fix-lg-v20-wi-fi-issues/

Do you have drivers for Win 95 for your device? It should work as a basic monitor. Remember Win 95 driver catalog is very small compared to Win 10. Some monitors on Win 95 needed drivers. Dells did, gateway, etc',

https://support.google.com/accounts/answer/61416?co=GENIE.Platform%3DDesktop&hl=en

It is not going to work. Both wifi and ethernet are for internet connection only. Ethernet is much faster than wifi. Also there is possibility to damage tv by plugging ethernet cable which is connected device using POE (power over ethernet). You need to connect your dvr via hdmi, component or composite cable

Try another monitor or computer to determine what is problem. It could be monitor, cable or computer video card

It may not be getting a signal,; the bars could be a test pattern.

https://www.lg.com/us/mobile-phones/VS415PP/Userguide/018.html

go into settings and change the region. but some DVD players will not let you change the region. but some will. just change the region to 1

go to input and click the one you hooked up the cable to

Hi, Is the network invisible on both 2.4g and 5g on your device?

Sounds like there was an accidental change to the brightness control. Try unplugging the TV overnight and see if it will reset to factory setup. If that doesn't work use your flashlight to see if you can get to the menu page for brightness and then move the control to the middle-- it will bring up the brightness. Also, you can try to find the menu item to reset all controls to the factory settings. Look in your manual or find the manual on-line.

Hi, that message indicates that your video source is providing an unsupported video resolution , please check in settings that video output resolution is no more than 1920 x 1080 @ 60Hz. Also remember to verify that HDMI is selected as input source at monitor.

DVD REGION FREE & BLUE-RAY REGION FREE To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region. You can enter a new region and it also shows you how many changes have been made. NOTE you can make only 4 changes and the player will lock permanently on the 4th change. If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk. The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: - www.dvdfab.com/products,free.htm