20 Most Recent JVC GR-D270 Mini DV Digital Camcorder - Page 3 Questions & Answers

Check your display(on screen) do you see a word "NARRATION"? if so switch that off(can be found in the menu). Or it could be your internal speaker busted. To confirm connect it to your TV, sound must be heard on tv. Otherwise, have it check by the expert. Good luck

Please go further down on the message, you must see a numeric code, like 03, or 02. In case you'll see 03, open the cassette door(let it open until cassette come out) about 5 sec or more(make sure you have enough batt. charge or use adapter). Once ejected do not use that cassette again. Using new cassette and same thing happen, have your camera checked by the expert. Error code other than 03, you need to consult the expert. Hope it helps

Hi,
I had the same problem, just spray electronic switch cleaner onto the tape reader heads. Solved my problem first time.

It sounds like you may have the the camera in manual mode or that the Iris may be turned down. I am not sure if you model has an Iris control so make sure it is not in manual mode.

red carefully the manual on page 45

Here is the link, you may need to Install the latest version of Adobe Reader to view this manual
http://resources.jvc.com/Resources/00/00/94/LYT1354-001A.pdf

Have you tried the JVC website? They have accessories along with chargers.


Rob

Get a 4-pin Firewire cable. Plugs in just below power plug slot. What plug you need on the other end depends on your computer. You can get Firewires in 4 to 4 pin; 4 to 6 pin, and 4 pin to USB. My laptop is configured to take a 4 or 6 pin Firewire but my desktop only has USB. I transfered using 4 to 4 pin and it worked great. No drivers, no discs needed...at least with Vista. As soon as I plugged in the camera, I was asked to whether I wanted to transfer from biginning of tape or at currenty location. I chose from the beginning and the camera automatically rewound and strated to transfer to the PC. I don't know if it would work same way with 4-wire Firewire to USB but assume it would. Cables around $35 but I purchased at Circuit City for the going out of business discount. I also bought some SD cards so I can take snapshots and transfer them too for print.

Get a firewire and you should be fine.

C

You can get a free membership on this site and download a manual, where, on page 18 of the pdf
document you will discover that the recording button is at the rear of the camera, at the top right hand
corner of the battery and at the lower right hand corner of the viewfinder, you can get tapes anywhere, even drugstores, and simply select memory card recording to record to your chip.

i need driver to jvc gr-d270 for windows xP

same problem here... i tried to using USB cable to connect to a computer but the camcorder cannot be detected.

Try taking the pictures in the AUTO mode, if the pictures are good in LCD panel they should be good on pc also, so it is not a download problem.

I can't find e setup for sony
camcorder

Remove the battery and let the unit rest for a few hours, try again.Tap the tape door, the tape may have become lodged. If this doesn't work then you will have to send it for repair.
Safe mode is to protect it from any more damage.

here some steps on how to transfer it to your computer.

• Install the cd driver camed with your camcorder to your pc
• Use USB to connect your camcorder and your pc after that it should be recognize
• If not then do step 1
• Use Ulead movie producer or Windows movie maker or any Video editing software
• Upload it and let it stream
• After uploading all videos save it on any various types of videos you like

Now your videos are on your computer

thank you for using fixya
CHARCOIS

Firewire is the only way to transfer unless you are running Windows 98 as those are the only USB drivers available for this camera and wont load on XP or Vista.