20 Most Recent
JVC GR-D275 Mini DV Digital Camcorder - Page 2 Questions & Answers
My computer doesn't not recognize my JVC GR-D275 camcorder.
sack whoever told you not to use firewire - buy a card for your PC and cable suitable for the camera (likely to end up being a 1394 to iLink). USB is wholly unsuitable (1.0/1.1 is too slow and 2.0 not stable enough) for transferring video at the bitrates that come from DV. Firewire is designed almost exclusively for high-bandwidth applications such as this.
Safeguard mode
My camera is on unit in safeguard mode and it says eject and reinstall tape! What do you suggest??
Transfer video to my desktop
hi
you can do that by using your bundled software for your video camera. but if you dont have one, you can always download at majorgeeks.com
when you already have the video downloaded to your computer, you can always clip it and reduce its filesize so that you can send it thru email to reduce the upload time to your email.
hope this helps you.
JVC GR-D275 not seen as connected to computer
Many Camcorder users have faced problems while connecting
their camcorder to their PC. One of the most common problems is ?no
activity? after connecting the camcorder to the PC. The found new
hardware wizard does not run and fails to detect the camcorder.
This can mean two things. Either the DV port on the Camcorder
is not working or the FireWire cable is faulty. Try using a different FireWire cable. If the camera is still not detected by the PC, try connecting it to a different PC. If the Camcorder is still not detected, then your camcorders DV port is most likely at fault.
Confirming that the FireWire Port on you PC is working fine You can check the status of the FireWire port from under Device Manager. To access the Device Manager, Right Click on My Computer and then click on Properties. Select the Hardware tab and click on Device Manager. If you cannot see the FireWire port in the list, then it is not inserted properly into the motherboard. If you see a Yellow exclamation mark, then you need to install the drivers, which are usually bundled with a Floppy or CD with the FireWire card.
JVC GR-D275U Driver for mac
You would need to use iMovie. Most MacBooks come with this already installed but if you can't find it you might have to buy it from apple's website. All you have to do is open iMovie with the camera connected and on and import the movie into iMovie, then you can edit the way you want it to be. iMovie has some great tutorials as well. Importing and editing can take a while, however.
Why won't my digital camera charge via USB anymore?
Take camera and its battery to a camera outlet, ask them to check the built-in rechargeable battery.
Most outlets will help you with this, as its likely that if the battery has failed, you'll buy a replacement from the same dealer.
Not finding what you are looking for?