Top 20 JVC Cybercam GR-D200US Mini DV Digital Camcorder Questions & Answers

Hello, Regina - Without knowing the make and model of the camcorder it is a challenge to give you the best information. Instead, I suggest you take the camcorder to a store which specializes in cameras and related equipment. Someone at such a store can give you the best advice. Note: For more permanence of the videos you may want to have them transferred to a DVD. Best wishes.

Watch the video at the link

most like these ones. dollar tree store has a whole bunch for a dollar a piece of course

This is usually caused by a failed component in the power circuit within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

If you have an AV Video Audio Out on the camera, as I suspect you do. Then you can get a USB Video/Audio Capture device, OR a PCI TV/Video capture card, (Best) and using that you can "Stream" the video over this link to the PC and save it as a Video file,say MPG4 or the like. This gives great results and is easy to do. You simply connect up the camera, start the Video capture software, and press Play on tape, so to speak, then you will be able to capture the video,and save it as you wish, then you can burn a DVD or send it to someone else. Otherwise you can get USB to Firewire converters and you can use that too. But you will still need the same video capture software and such. Dscaler is a great recording software.

I'm sorry, it can not be removed without power unless have it open. Hope it helps

Hi, please get it downloaded here : www.givemefile.net > ... > Camera & Foto > Digital camera
www.jvc.com/
www.helpdrivers.com/cameras/JVC/

Best regards, Jay

As I understand it your computer needs either a firewire port or a 4 or 6 pin DV port depending on what type of connector is on the computer end of the DV cable you purchased.

Please can uyou send GR-DA30AG driver software for my e mail is [email protected]

The USB on your camcorder is for downloading still pictures only. If you want to transfer video to your computer you need to hook up a firewire cable, which is to the right of the USB connection. Firewire is also known as 1394 connection.

Hope it helps.

Hi, You need to use 4 pin firewire cable to connect to the PC. Switch on the cam. Open Windows Movie Maker and import the video from device.

Hi, You need to connect to PC using a 4 pin firewire cable. and then switch on the cam. Import the video using Windows Movie Maker.

Hi, You should connect using 4 pin Firewire cable to download the video. Also use Windows Movie Maker software.

The same thing just happened to mine, and there are so many other complaints on other sites. JVC should have seen this problem coming that products are ripping us off

Product called EasyCap, for about 15 bucks, "can be found online" Has USB plug. Use your cable that has the 3.5 pin that goes out to rca cable, yellow, white and red. EasyCap has the RCA to USB then to computer. Use Windows Movie Maker, comes with XP & Vista, capture while playing from there. I just converted about 20 full tapes from one cannon mini 8 and 15 from a jvc dv onto a TB drive.

install first the bundled software with your camera turned on and plugged in to your pc and then restart your pc if its necessary..

maybe u r using wrong reference battery

I have the same camera and use vista without a problem. However I use the firewire interface and not the USB which might be the explanation.
By the way, I can't find my manual. The date and time don't stay saved for any length of time between use. Is there a baterry that need to be changed and if so where is it?

Thanks

The JVC USB driver was written before introduction of the Windows XP system. This warning is displayed with other manufacturer’s digital cameras, also, and is not strictly a JVC phenomenon. In order to use the USB interface between the camera and your computer, select the “CONTINUE anyway” option provided in this warning display. To JVC’s knowledge, there are no negative effects to using JVC driver with Windows XP.