JVC Cybercam GR-D200US Mini DV Digital Camcorder - Answered Questions & Fixed issues
My mom has an older
Hello, Regina -
Without knowing the make and model of the camcorder it is a challenge to give you the best information.
Instead, I suggest you take the camcorder to a store which specializes in cameras and related equipment. Someone at such a store can give you the best advice.
Note: For more permanence of the videos you may want to have them transferred to a DVD.
Best wishes.
2/6/2018 5:13:27 PM •
JVC Cybercam...
•
Answered
on Feb 06, 2018
•
112 views
Can I connect my VHS-C or S-VHS-C camera to my computer?
Since VHSC camcorders feature only analog outputs: it is not possible to connect the camcorder directly to a PC (unless a computer video card is equipped with analog inputs). The only way to transfer images from the camcorder to a PC will be using an external device capable of analog/digital signal conversion. JVC has released a capture device model, GV-CB3U which has the capability of video capture of a single frame in either Bitmap or JPEG format. The GV-CB3 can be connected to any video source through a standard video or S-Video connector and download single image to a PC using serial port (RS232C communication port). The JLIP Video Capture software necessary to transfer images to the computer as well as connecting cables are supplied with this product. You can also use 3rd party hardware (Video Capturing device) to send information from your camera to a PC. Visit your local PC or Office store for more information on other video capturing devices.
12/21/2012 5:16:01 AM •
JVC Cybercam...
•
Answered
on Dec 21, 2012
•
830 views
Wont turn on or charge
This is usually caused by a failed component in the power circuit within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
11/6/2010 1:51:38 AM •
JVC Cybercam...
•
Answered
on Nov 06, 2010
•
48 views
My EVERIO doesn't respond to controls
First disconnect power source (both battery and AC adaptor) then reconnect it. If that will not correct this situation, try the following reset procedure: press and hold simultaneously for more than 5 seconds both MENU and MODE buttons. This procedure will also restore all default settings in the camera.
9/11/2010 10:46:03 AM •
JVC Cybercam...
•
Answered
on Sep 11, 2010
•
181 views
Transfer movie from mini tape to computer - JVC GR-D770U
Product called EasyCap, for about 15 bucks, "can be found online" Has USB plug. Use your cable that has the 3.5 pin that goes out to rca cable, yellow, white and red. EasyCap has the RCA to USB then to computer. Use Windows Movie Maker, comes with XP & Vista, capture while playing from there. I just converted about 20 full tapes from one cannon mini 8 and 15 from a jvc dv onto a TB drive.
10/13/2014 2:02:44 PM •
JVC Cybercam...
•
Answered
on Oct 13, 2014
•
17,418 views
Uploading issues from JVC mini GR-D770U
As I understand it your computer needs either a firewire port or a 4 or 6 pin DV port depending on what type of connector is on the computer end of the DV cable you purchased.
9/8/2009 5:45:52 PM •
JVC Cybercam...
•
Answered
on Sep 08, 2009
•
394 views
Upload video
The USB on your camcorder is for downloading still pictures only. If
you want to transfer video to your computer you need to hook up a
firewire cable, which is to the right of the USB connection. Firewire
is also known as 1394 connection.
Hope it helps.
2/9/2009 5:55:00 PM •
JVC Cybercam...
•
Answered
on Feb 09, 2009
•
485 views
JVC 34X GR-D770U
Hi,
You should connect using 4 pin Firewire cable to download the video.
Also use Windows Movie Maker software.
12/29/2008 9:15:06 PM •
JVC Cybercam...
•
Answered
on Dec 29, 2008
•
207 views
Problems installing JVC USB drivers
The JVC USB driver was written before introduction of the Windows XP system. This warning is displayed with other manufacturer’s digital cameras, also, and is not strictly a JVC phenomenon.
In order to use the USB interface between the camera and your computer, select the “CONTINUE anyway” option provided in this warning display. To JVC’s knowledge, there are no negative effects to using JVC driver with Windows XP.
11/14/2018 9:34:26 AM •
JVC Cybercam...
•
Answered
on Nov 14, 2018
•
3,112 views
JVC GR-DVF31 - How to transfer MiniDV to PC?
buy that wire, check ur camcorder if it has 6pin or 4pin for firewire then check ur pc if it has firewire card...if not you have to purchase the ieee1394card. install it then connect your camcorder to pc through firewire and that will be it.. u also need to have a software for video capturing and editing like adobe, roxio, pinnacle , etc...hope that helps.
7/12/2008 1:33:09 AM •
JVC Cybercam...
•
Answered
on Jul 12, 2008
•
1,377 views
GR-D200U in safeguard mode
The same thing just happened to mine, and there are so many other complaints on other sites. JVC should have seen this problem coming that products are ripping us off
6/23/2008 2:59:03 AM •
JVC Cybercam...
•
Answered
on Jun 23, 2008
•
348 views
JVC GR DVL9800 - Vista won't recognize
I have the same camera and use vista without a problem. However I use the firewire interface and not the USB which might be the explanation.
By the way, I can't find my manual. The date and time don't stay saved for any length of time between use. Is there a baterry that need to be changed and if so where is it?
Thanks
7/26/2008 11:06:43 AM •
JVC Cybercam...
•
Answered
on Jul 26, 2008
•
551 views
Not finding what you are looking for?