Top 20
Panasonic NV-DS65 Mini DV Digital Camcorder Questions & Answers
Hi There Can Someone Please Help I Have A
You will require a firewire cable.
Usually a 4 pin to 6 pin cable. 4 pin to camera 6 pin to computer, assuming you PC has a fireiwre socket.
PC computer have Movie Maker as part of the OS.
Connect with the above cable and you should be good to go.
Al
9/29/2013 11:18:59 PM •
Panasonic...
•
332 views • 0 helpful votes
Play video on tv
You will require the cable that came with the camera to be plugged into the TVS AV input sockets.
Al
9/29/2013 4:09:35 PM •
Panasonic...
•
69 views • 0 helpful votes
Manual dew instrucciones
Use a hair dryer to blow warm air into the unit. Do not heat the unit but allow only warm air to circulate so as to remove any dew formation within the unit that must allow the unit to reset the error.
1/9/2012 1:02:51 PM •
Panasonic...
•
85 views • 0 helpful votes
I have no picture on
CCD Imager chip is defective in your camcorder that is why no live view in camera mode for fresh recordings.
CCD Imager is electronic device that converts an image into electronic signals and its necessary part of any digital camera/ camcorder, it should be replaced by technician because camcorder will take apart and soldering work is required.
Thanks.
9/5/2011 9:32:45 AM •
Panasonic...
•
315 views • 2 helpful votes
There is no picture on the screen in either camera
The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.
4/26/2011 4:00:50 AM •
Panasonic...
•
89 views • 0 helpful votes
I have a problem in
Reduction gear in mechanism is dampered,so it wont drive the cassatte holder,so repelace the reduction gear
3/2/2011 8:59:17 AM •
Panasonic...
•
229 views • 0 helpful votes
How can I transfer a
You must have a Firewire cable to transfer video from the camera to the pc. It can't be done with the USB cable. That's only good for transfering still photos. If your computer doesn't have a Fireware connection, then you must purchase a Firewire card separately then add it to the computer. Windows Movie Maker is all that's needed for the software.
10/16/2010 3:40:10 PM •
Panasonic...
•
492 views • 0 helpful votes
Panasonic NV-GS60 not ejecting cassette.
Tape mechanism problems are quite complicated but they can usually be repaired fairly inexpensively. This one soun ds like a possible bad gear. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
10/19/2010 10:31:00 PM •
Panasonic...
•
373 views • 0 helpful votes
I set up my camera
you just need cable with both end DV pin.its mean one end you have dv out put then where you input also need DV in put so need both side DV pins.after that you can download your movie on pc.
10/23/2010 5:31:47 PM •
Panasonic...
•
221 views • 1 helpful votes
When i flip open the
This is most likely caused by a damaged or misaligned video drum and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.
If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
11/1/2010 6:03:12 AM •
Panasonic...
•
44 views • 0 helpful votes
Starts to record then stops
It is quite possible that the reel sensor is not detecting or the reel drive is not working in the drive. Look into the cover of the Dv and see when you record if the tape moves and the wind takes up the reel. If you are noticing that the reel is not turning then it is the mechanism of the reel drive ,if the reel moves but the count does not take up then you have the reel sensor faulty. In both the cases you will have to remove and check in the mechanism and it involves a very close careful work.hence I will not advice you to work by yourselt unless you are familiar. If not take help with my advice. Further the fault can also lead to many other sections, to the luse generator , to the mP or allied section. Tryt o rewing and see if the counter works if so check the rollers. Hope this advice guides you. Good day
7/24/2010 5:59:17 AM •
Panasonic...
•
207 views • 2 helpful votes
Panasonic NV-DS65 won't eject a tape
It sounds that what's happened is your idler wheel is slipping or even your main drive belt.
When you loaded the tape it was taken by tape guides around the video drum. When you pressed eject the tape guides returned to their proper places but the tape stayedin a loop around the mechanism because the take up spool had no drive to pull the tape back into the cassette. When you've tried to pull the cassette out of the camera that loop of tape has snagged on part of the mechanism and that's what is stopping the cassette from being removed. I'm afraid the tape would be damaged at that spot so you may as well simply snip it with a pair of long bladed scissors and the cassette will pull straight out.
What is then required is either the drive belt changed or the idler wheel assembly changed. Either way a service center will be required unless yourself or a friend is able to buy the parts (not expensive) and do the work required.
Good luck
4/24/2010 6:40:09 AM •
Panasonic...
•
754 views • 0 helpful votes
Camcorder only operates for 3 seconds in playbaco
HAVE YOU CLEANED YOUR HEADS LATELY? THIS HAPPENED TO ME, AND LOOKED AT VERY EXPENSIVE HEAD CLEANERS THAT I WAS TOLD WOULD ONLY WORK. I SPOKE TO A SALESMAN AT OUR LOCAL RADIO SHACK WHO SOLD ME ONE FOR $2.00. IT WORKED GREAT AND TOOK CARE OF THE PROBLEM.
7/16/2010 9:21:12 PM •
Panasonic...
•
60 views • 0 helpful votes
Not finding what you are looking for?