Panasonic NV-DS65 Mini DV Digital Camcorder - Answered Questions & Fixed issues


You will require the cable that came with the camera to be plugged into the TVS AV input sockets.

Al

Panasonic... | Answered on Nov 22, 2013 | 47 views


You will require a firewire cable.
Usually a 4 pin to 6 pin cable. 4 pin to camera 6 pin to computer, assuming you PC has a fireiwre socket.
PC computer have Movie Maker as part of the OS.
Connect with the above cable and you should be good to go.

Al

Panasonic... | Answered on Nov 22, 2013 | 157 views


This may sound daft BUT you have taken the lens cover off, have`nt you?

Panasonic... | Answered on Dec 28, 2012 | 26 views


Use a hair dryer to blow warm air into the unit. Do not heat the unit but allow only warm air to circulate so as to remove any dew formation within the unit that must allow the unit to reset the error.

Panasonic... | Answered on Jan 20, 2012 | 54 views


CCD Imager chip is defective in your camcorder that is why no live view in camera mode for fresh recordings.
CCD Imager is electronic device that converts an image into electronic signals and its necessary part of any digital camera/ camcorder, it should be replaced by technician because camcorder will take apart and soldering work is required.
Thanks.

Panasonic... | Answered on Sep 05, 2011 | 194 views


HI there.

My name is ib_yang. How can we help you?

Panasonic... | Answered on Aug 24, 2011 | 16 views


Reduction gear in mechanism is dampered,so it wont drive the cassatte holder,so repelace the reduction gear

Panasonic... | Answered on Jun 10, 2011 | 134 views


The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Panasonic... | Answered on Apr 27, 2011 | 30 views


Hi
I had the same problem and the solution is very simple:

Remove bottom plate by unscreewing the 7 screews (for one of them you must open the viewfinder) and make sure the ribbon cables are connected securely . You just need to push genty the ribbon cabbles and reposition the plate, this should solve the problem.

Panasonic... | Answered on Mar 19, 2011 | 246 views


did you turn the camera on when you plug the wires in

Panasonic... | Answered on Feb 23, 2011 | 78 views


You must have a Firewire cable to transfer video from the camera to the pc. It can't be done with the USB cable. That's only good for transfering still photos. If your computer doesn't have a Fireware connection, then you must purchase a Firewire card separately then add it to the computer. Windows Movie Maker is all that's needed for the software.

Panasonic... | Answered on Jan 08, 2011 | 237 views


this link is free download, follow this two picture to get your user manual: http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/NVDS65-_E
mabroukmedal_29.jpg


mabroukmedal_30.jpg

Panasonic... | Answered on Dec 07, 2010 | 212 views


This is most likely caused by a damaged or misaligned video drum and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Panasonic... | Answered on Nov 01, 2010 | 27 views


you just need cable with both end DV pin.its mean one end you have dv out put then where you input also need DV in put so need both side DV pins.after that you can download your movie on pc.

Panasonic... | Answered on Jan 08, 2011 | 168 views


Tape mechanism problems are quite complicated but they can usually be repaired fairly inexpensively. This one soun ds like a possible bad gear. However, it's not a user serviceable problem and will need to be diagnosed by a qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Panasonic... | Answered on Oct 20, 2010 | 206 views


Hi! Thanks for using Fixya

Driver software is available online for your device. You can visit your manufactures website by clicking HERE

Hope this help

Panasonic... | Answered on Sep 17, 2010 | 183 views


It is quite possible that the reel sensor is not detecting or the reel drive is not working in the drive. Look into the cover of the Dv and see when you record if the tape moves and the wind takes up the reel. If you are noticing that the reel is not turning then it is the mechanism of the reel drive ,if the reel moves but the count does not take up then you have the reel sensor faulty. In both the cases you will have to remove and check in the mechanism and it involves a very close careful work.hence I will not advice you to work by yourselt unless you are familiar. If not take help with my advice. Further the fault can also lead to many other sections, to the luse generator , to the mP or allied section. Tryt o rewing and see if the counter works if so check the rollers. Hope this advice guides you. Good day

Panasonic... | Answered on Jul 24, 2010 | 192 views


HAVE YOU CLEANED YOUR HEADS LATELY? THIS HAPPENED TO ME, AND LOOKED AT VERY EXPENSIVE HEAD CLEANERS THAT I WAS TOLD WOULD ONLY WORK. I SPOKE TO A SALESMAN AT OUR LOCAL RADIO SHACK WHO SOLD ME ONE FOR $2.00. IT WORKED GREAT AND TOOK CARE OF THE PROBLEM.

Panasonic... | Answered on Jul 17, 2010 | 50 views


This looks like a relay or micro switch has gone, camera needs looking at.

Panasonic... | Answered on Jul 16, 2010 | 222 views

Not finding what you are looking for?
Panasonic NV-DS65 Mini DV Digital Camcorder Logo

137 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Kenneth Walker

Level 2 Expert

292 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2015 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...