Panasonic NV-GS35 Mini DV Digital Camcorder - Answered Questions & Fixed issues

hi, it can be had from Panasonic's website.

One source for the battery is here.

You can download the software and drivers from the panasonic support page for your product, I'm posting the link to the page below.

http://www2.panasonic.com/consumer-electronics/support/MiniDV-Camcorders/model.PV-GS35

This happens when the internal focus lens is off track or impaired in some way and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

You will need the firewire cable. Most likely a 4 to 6 pin unless your MBook has an 800 port, in which case it's a 4 to 9 pin cable.

Your PC should have Windows Movie Maker installed as part of the OS. It will do the job if the Pansonic software fails.

Al

You will need: 1. A video capture software such as Ulead VideoStudio 10 2. firewire or USB cable
1.Connect your camera with the cable. 2.Start Ulead VideoStudio 10 3.Go to Capture tab 4.Select your Panasonic device as the input for Ulead 5.Hit the "capture" button.
Ulead will start playing your video as well as recording to the PC at the same time

Option 1:
Check your audio settings on your camcorder. You may have an option to zoom in on the sound or record sound all around you. Try switching between either of those and see if that helps.

Option 2:
Add an external microphone

Option 3:
Try to muffle (lightly cover up) your onboard mic to keep the loud sounds from auto adjusting the volume.

hi,dew means you got humidity level to high inside the camera
,press eject,removed the battery and try to use an air dryer an blow air inside the mechanism
thats where the dew sensor is located , for few minutes the let it cool down in a dry place
thats should reset the sensor system, if its not work that mean you will have to
replace the dew sensor.
hope that will help you,thats all i can do from here.
regards Alan.

First try removing all power from the camera, the main battery, any power supply, and the backup clock battery. THEN press the reset button and hold it for at least 15 seconds. Then replace the internal battery if it is dead. Then if the camera still does not operate correctly, it probably needs repair.

You can fit an add-on Firewire (DV) interface card to a PC that has expansion slots (not a laptop). These are available cheaply from Amazon or eBay, and other suppliers. There is also apparently an adapter to connect firewire into a USB port, but this is reported not to work well with video cameras.

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I

it s not working,....when i click to insatall..it extracts 4 a second n then an error occures..,,it s not working....

do not go for repairs if it fell in water it will be too expensive and wont give you good service after repairs,.. sad

Use http://www.downloadvideos-convert.com/download-videos-music

1. Download Video Download Studio, install it.

2. Go to the interface, you can download (Automatic capture) the YouTube video there directly. Tab Download to Convert, you can also click "Add" button to upload the videos from computer. You can also edit video by trim and crop functions.

3. After the video display on the Video Download Studio, click "Profile" and choose "General video", then select an MP4 format. Set destination file, clicking Convert button to complete the task.

Not only convert video to MP4, but also support batch conversion. Safe and easy to operate. No Viruses, No Spyware, No Adware. Do not hesitate. Have a try!

Hello :

Here is the driver that you are looking for . Please don't forget to rate if that helped :

Panasonic NV-GS35 Mini DV Digital Camcorder driver .

good luck .

If you realized that its a electrical fault then must visit service center.
Thanks.

http://safemanuals.com/user-guide-instructions-owner-manual/PANASONIC/NV-GS35-_S
from this address you can download manual ...

u can order them email them the part discription they can send u one if u go to panasonic they will ask for a price of new cam

link for order or try ebay for this it iwll help

http://www.partmaster.co.uk/cgi-bin/search.pl?query=Panasonic%20NVGS35&pg=3&path=98821,112403:98828&brand=Panasonic&model=NVGS35&part=

you first need to strip both the camcorder and the lcd door to get the actual cable out. It might just push into a terminal connector at either end or it might be soldered to the circuit board at either end. Once you find that out then you could probably get a piece of ribbon cable to replace it from an electronic parts supplier. You also have the option (if you have a decent soldering iron) to just use standard multicore cable and solder a colour-coded set to replace the ribbon. If the board uses connectors you would have to unsolder that too and then make up your own cable loom using very thin cable.
It's a delicate operation requiring patience and a BIG magnifying glass ..I had to fix the ribbon cable when I blew up my LCD monitor...the terminals are really tiny but it can be done!!

plsw rate me FIXYA if i helped

Bad or loose LCD data cable.