20 Most Recent
ViewSonic VA720 17" LCD Flat Panel Monitor - Page 4 Questions & Answers
Viewsonic VG700b bug
The light turning to orange means the monitor is not getting a signal from the computer. Check your monitor cable at both ends and make sure it is in very tight and secure at the computer end as well. Also check to see if the computer stays on when the light goes to orange on the monitor. The power cord for the computer might be loose.
Out of range message
Chech your data cable going from the monitor to the computer..also check the source..
Display on mac mini only shows no signal and turns black
his step-by-step guide describers how to obtain and install ViewSonic VA720 drivers for Mac.
1. Define your ViewSonic Monitor device model.
2. Define your operating system to install your ViewSonic Monitor device. Note:
Update Drivers in Mac
3. Browse Monitor Drivers.
4. Find ViewSonic Monitor Drivers.
5. Select ViewSonic VA720.
6. Download ViewSonic VA720. Note: you can update all Drivers automatically with
RadarSync (Freeware) or
Driver Detective (Shareware).
7. Install ViewSonic VA720.
8. Restart or reboot your computer to finish your driver installation. Note: you can
backup your computer drivers before updating.
Sound wont come on
Did the sound ever work?
Is your sound cable plugged into the green hole on the back of your PC and into the correct hole on the back side of the monitor?
Is the mute on, either on the monitor or from the keyboard or windows volume control?
Go to "Start", "Control Panel", "Sounds and Audio Devices" and poke around there. Make sure all the sound settings look correct there.
Hope this helps, if I was able to FixYa, please remember to rate me. Thanks.
No Power
Hi,
It's either the LCD monitor is not receiving video signal from the PC or something is wrong with the input circuitry of the monitor.
1. If it is the PC, it could be anything from the video card, memory or something else;
2. If it is the monitor, you have to open it up and diagnose the problem. This would probably require component level repair. You have to be familiar with the use of a soldering iron, a VOM and circuit analysis to be able to do a DIY.
If you can borrow or have access to a known good 2nd monitor you can confirm which one is the issue, PC or monitor.
Hope this works out for you. Pls post again how things turn up that we can further resolve the problem. Good luck and kind regards.
Display problem
IF IT CONECT TO A PC THAN YOU HAVE CORRUPT DRIVER AND NEED TO GO INTO PROPERTIES OF VEDIO CORD SELECT DRIVERS UPDATE AND REBBOOT THE SYSTEM
ROD
Powersuply
OPEN UP YOUR PHONE BOOK OR YELLOW PAGES OR ONLINE LOOK UP COMPUTER SPECAILIST,
YOU WANT COMPUTER CABLING SPECALITY THEY CAN MAKE ANY TYPE OF CABLE OR CONNECT YOU CAN THINK OF AND EVEN HARD WIRE A CORD INTO YOUR SYSTEM SO YOU NEVER LOOSE ANOTHER ONE.
CANDYMANGANDY
Lcd tv with wrong color on one pixel
LCD screens occasionally have what are called "Stuck pixels". There is a tutorial in wikihow which might help you out here:
http://www.fixya.com/manuals/w153177-fix_stuck_pixel_lcd_monitor
Try that and see if it helps. Stuck pixels are actually a slighty common problem.
Viewsonic va720 monitor
is it that whatever u try the screen does not come alive???????
was there a voltage spurge or something maybe an IC blew up..
could u tell me when did this happen
Problem of reset setting
Hi..there,
It's seems your bios on the monitor are the caused... Next time went it come one again...press 1 for YES. Still pop up again...you need to reset to the factory settings or need to updated your bios...
View sonic g220f
If both ends of the cable are plug in type, any monitor cable with a 15 pin D connectors will work.
Search internet for VGA cable.
Not finding what you are looking for?